Main Content

Verifikation von Modellen

Blöcke für selbst-verifizierende Modelle, wie Check Input Resolution

Verwenden Sie Blöcke aus der Bibliothek „Modell Verification“, um selbstvalidierende Modelle zu erstellen, einschließlich der Überprüfung, ob Signale während der Simulation die vorgegebenen Grenzen einhalten.

Blöcke

AssertionCheck whether signal is zero
Check Dynamic GapCheck that gap of possibly varying width occurs in range of signal's amplitudes
Check Dynamic RangeCheck that signal falls inside range of amplitudes that varies from time step to time step
Check Static GapCheck that gap exists in signal's range of amplitudes
Check Static RangeCheck that signal falls inside fixed range of amplitudes
Check Discrete GradientCheck that absolute value of difference between successive samples of discrete signal is less than specified value
Check Dynamic Lower BoundCheck that one signal is always less than another signal
Check Dynamic Upper BoundCheck that one signal is always greater than another signal
Check Input ResolutionCheck that input signal has specified resolution
Check Static Lower BoundCheck that signal is greater than (or optionally equal to) static lower bound
Check Static Upper BoundCheck that signal is less than (or optionally equal to) static upper bound