Main Content

XCP Communication in Simulink

Vehicle network communication in Simulink® using XCP over CAN or UDP

Note

You cannot run on Linux® any Simulink models that contain blocks from the Vehicle Network Toolbox™ XCP Communication block library.

Blocks

XCP CAN ConfigurationConfigure XCP slave connection
XCP CAN Transport LayerTransport XCP messages via CAN
XCP CAN Data AcquisitionAcquire selected measurements from configured slave connection
XCP CAN Data StimulationPerform data stimulation on selected measurements
XCP UDP ConfigurationConfigure XCP UDP slave connection
XCP UDP Data AcquisitionAcquire selected measurements from configured slave connection
XCP UDP Data StimulationPerform data stimulation on selected measurements
XCP UDP BypassConnect the function-call outport to a function-call subsystem

Topics

Open the Vehicle Network Toolbox XCP Block Libraries

Access the XCP block libraries.

Vehicle Network Toolbox XCP Simulink Blocks

Overview of the Vehicle Network Toolbox XCP block libraries.

Supported Block Features

Supported features of blocks in the Vehicle Network Toolbox block library.

Featured Examples

XCP Data Acquisition over CAN

XCP Data Acquisition over CAN

Use XCP blocks to directly acquire measurement values from a slave in Simulink®. It uses a freely available XCP slave simulator from Vector and Vector virtual CAN channels. For access to virtual channels, Vector device drivers must be installed.

Open Model

Vehicle Network Toolbox Documentation

Support

Try MATLAB, Simulink, and Other Products

Get trial now