Suneesh
MathWorks
Followers: 0 Following: 0
Statistik
RANG
459
of 298.387
REPUTATION
172
BEITRÄGE
0 Fragen
106 Antworten
ANTWORTZUSTIMMUNG
0.00%
ERHALTENE STIMMEN
20
RANG
of 20.577
REPUTATION
N/A
DURCHSCHNITTLICHE BEWERTUNG
0.00
BEITRÄGE
0 Dateien
DOWNLOADS
0
ALL TIME DOWNLOADS
0
BEITRÄGE
0 Beiträge
BEITRÄGE
0 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
BEITRÄGE
0 Highlights
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
TCP/IP Connection with Smart Meter on xPC Target in Simulink Real Time 2016a and s-function
TCP specific socket functions (for example CONNECT) were not avaialble in R2016a. We have TCP blocks in 17a - try the pre-releas...
etwa 8 Jahre vor | 0
xcp slave for simulation
Not aware of one in Simulink but there is always the simulator available at vector.com. See: <https://www.mathworks.com/matla...
etwa 8 Jahre vor | 0
Using a DAQ card in a xPC target communication
Not supported. Supported D/A cards are listed here: http://www.mathworks.com/help/xpc/da.html
mehr als 9 Jahre vor | 0
When set up and configure xPC Target, why it has error messages: "Can not get interface ip address" "Batch file could not be creadted"
Sometimes happens due to the network not being "active". Try to turn on the target and when BIOS loads it should power up the ca...
mehr als 9 Jahre vor | 1
| akzeptiert
Real time control based on communication with database
You could write a MATLAB function to perform the three steps and then use a MATLAB timer object to execute it as often as you ne...
etwa 10 Jahre vor | 1
| akzeptiert
Is my RTW toolbox correctly installed?
This is an installation problem for which MathWorks provides free support. Please contact Tech Support.
etwa 10 Jahre vor | 0
| akzeptiert
Using vehicle network toolbox blocks with Simulink Real-Time
Vehicle Network Toolbox blocks usually work by using the Windows drivers for the cards. These drivers are not present on the SLR...
etwa 10 Jahre vor | 0
scanned malayalam handwritten text into an editable format
1. From an OCR perspective, I would start off with mapping the characters to the code for the individual characters. 2. Next...
etwa 10 Jahre vor | 0
How can I rotate xPC target screen to portrait mode?
That feature is not available. Do contact technical support so that the team is aware that such a feature is being requested for...
mehr als 10 Jahre vor | 0
Why does my xPC Target simulation stops at 100 sec while i configure it 144000 sec
That sounds like a bug. Please contact technical support.
mehr als 10 Jahre vor | 0
How to get a real-time data in using udp/tcp with xpc target?
This example may have something that you are looking for: <http://www.mathworks.com/help/xpc/examples/target-to-host-transmis...
mehr als 10 Jahre vor | 0
Standalone Real-Time Application for XPC target
<http://www.mathworks.com/help/xpc/gs/removable-disk-boot-method.html>
mehr als 10 Jahre vor | 0
Windows Real-Time Target - Serious Lag
1. Are you using the Synchronization block and running the model in Normal mode? Perhaps you could try the external mode and see...
mehr als 10 Jahre vor | 0
Are there CAN-USB drivers for Simulink Real-Time?
CAN USB drivers are not supported. All supported hardware are listed at: <http://www.mathworks.com/products/simulink-real-tim...
mehr als 10 Jahre vor | 0
| akzeptiert
How to display strings on xpc target (Simulink 2014)?
Scopes do not support strings since scopes display Simulink signal values which are always numeric. PRINTFs in S-Functions appea...
mehr als 10 Jahre vor | 0
Can I use each of the I8254x and I82559 chipsets for model-based ethernet communication in Simulink Real-Time, even if the network adapter is based on PCI Express (PCIe x4)?
Although there are hardware architectural differences between PCI and PCIe, they are software compatible. In theory, the target ...
mehr als 10 Jahre vor | 0
| akzeptiert
Three-Phase Fault Parameter Values of Simulink Model in Real-Time Target
This is more of a question about the Three-Phase fault block rather than about Simulink Real-Time. The parameter does not appear...
mehr als 10 Jahre vor | 0
Issue with a DAQ model NI PCIe-6351 with Real-Time Windows Target
Real-time Windows Target is a different product from Simulink Real-Time. 1. Do you see your card in the hardware list for Si...
mehr als 10 Jahre vor | 0
Complete build in SLRT
<http://www.mathworks.com/matlabcentral/answers/100533-is-it-possible-to-have-a-rebuild-all-option-for-custom-code-in-my-model-i...
mehr als 10 Jahre vor | 0
Problem booting XPC Target using v5.2 (2012a)
Only other troubleshooting step I can think of is disabling the USB controller in BIOS. Some USB controllers may have an incompa...
mehr als 10 Jahre vor | 0
| akzeptiert
Simulink Real-time CAN bus support
Only the blocks as indicated in the documentation are officially supported: <http://www.mathworks.com/help/xpc/dob-mode-can-m...
mehr als 10 Jahre vor | 0
| akzeptiert
Need help for Host-Target EtherCAT connection in Simulink Real Time (2014a)
Simulink requires just the ENI configuration file. In order to generate the config file you need the Beckhoff configurator (or s...
fast 11 Jahre vor | 0
| akzeptiert
Network Boot Problem - xPC - Help Needed
Perhaps the video card is not supported. Try: # Recreate the boot image with 'Target Scopes' Disabled. This boots the target ...
fast 11 Jahre vor | 0
| akzeptiert
Simulink Real Time - xPC Problem
Follow the instructions in the message: To see a list of current users use the lmstat utility or contact your Licens...
fast 11 Jahre vor | 0
how to access serial port data in matlab?
# Check if the device is transmitting. A loop back test is a good way to start with. # Sometimes a termination character is req...
fast 11 Jahre vor | 0
PLL examples some don't work powerlib problem
'powerlib' is part of the SimPowerSystems product. You may be missing that product. Contact MathWorks Technical Support to obtai...
fast 11 Jahre vor | 1
| akzeptiert
xPC Target & concurrent models - how to get TET?
Have you tried using the profiler? Here is an example for a concurrently executed model: <http://www.mathworks.com/help/xpc/e...
fast 11 Jahre vor | 0
Have you ever noticed an increasing delay while UDP protocol send/receive packets?
From the image of the model, you are using blocks from the product "Real-Time Windows target (RTWT)". I am not too familiar with...
fast 11 Jahre vor | 1
| akzeptiert
xPC target and ARM Cortex
There isn't one for ARM architecture. xPC target (Now Simulink Real-Time) is currently supported only for PC compatible architec...
fast 11 Jahre vor | 0
| akzeptiert
HIL with Arduino uno without xpc target using realtime windows target
http://www.mathworks.com/videos/programming-arduino-uno-with-simulink-86316.html
fast 11 Jahre vor | 0
