How can I upload and plot temperature values that are both above zero (e.g., ambient) and below zero (e.g., in a freezer)?
11 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I wish to upload and plot on channel chart both positive and negative temperatures from DS18B20 sensor. While I can see the positive temperatures properly on the chart, the negative temperatures also show as above zero. The code snippet is as below:
if(temp_data & 0x80)
{
temp_data = (~temp_data)+1;
sprintf(esp_buff, "GET /update?api_key=%s&field1=%d", API_WRITE_KEY, -temp_data);
}
else
{
sprintf(esp_buff, "GET /update?api_key=%s&field1=%d", API_WRITE_KEY, temp_data);
}
//sprintf(esp_buff, "GET /update?api_key=%s&field1=%d", API_WRITE_KEY, temp_data);
ESP8266_Send(esp_buff);
It can be seen that the last two readings which are -6 and -9 deg C,show as +6 and +9 deg C. what should I do to make them come below the zero line?
5 Kommentare
dpb
am 12 Sep. 2022
I backed out of the thread because I have no Arduino experience nor one at hand to play with to learn about, but the poking around I did indicated there are at least a couple of libraries that can be used to interact with the one-wire device...it appeared with those one just reads a buffer and magic happens...
Antworten (3)
Image Analyst
am 12 Sep. 2022
If you can get your data into a double image, you can use
imshow(yourTemperatureImage, []);
0 Kommentare
Christopher Stapels
am 12 Sep. 2022
Bearbeitet: Christopher Stapels
am 12 Sep. 2022
I think the library answer seems best.
This article seems to indicate that you can use arduino libraries in Atmel Studio.
If you wanted to fix the code above, I would start by writing rawtemp to thingspeak and seeing if the negative values are encoded in there. Then you can fix your code to translate rawtemp appropriately.
sprintf(esp_buff, "GET /update?api_key=%s&field1=%d&field2=%d", API_WRITE_KEY, temp_data,rawtemp);
1 Kommentar
Communitys
Weitere Antworten in ThingSpeak Community
Siehe auch
Kategorien
Mehr zu Instrument Control Toolbox finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!