inlineComponent
Remove reference architecture or behavior from component
Description
retains the contents of the architecture model referenced by the specified
componentObj
= inlineComponent(component
,inlineFlag
)component
and breaks the link to the reference model. If
inlineFlag
is set to 0 (false
)., then the contents
of the architecture model are removed and only interfaces remain. You can also use
inlineComponent
to remove Stateflow® chart and Simulink® behaviors from a component or to remove Simulink model or subsystem behaviors referenced by a component.
Examples
Reuse Component and Remove Architecture Reference
Save the component robotComp
in the architecture
model Robot.slx
and reference it from another component,
electricComp
, so that the electricComp
component
uses the architecture of the robotComp
component. Remove the
architecture reference from the robotComp
component so that its
architecture can be edited independently.
Create a model archModel.slx
.
model = systemcomposer.createModel("archModel"); systemcomposer.openModel("archModel"); arch = get(model,"Architecture");
Add two components to the model electricComp
and robotComp
. Rearrange the model.
names = ["electricComp","robotComp"]; comp = addComponent(arch,names); Simulink.BlockDiagram.arrangeSystem("archModel")
Save the robotComp
component in the Robot.slx
model so the component references the model.
saveAsModel(comp(2),"Robot");
Link the electricComp
component to the same model
Robot.slx
so it uses the architecture of the original
robotComp
component and references the architecture model
Robot.slx
.
linkToModel(comp(1),"Robot");
Remove the architecture reference from the robotComp
component
while retaining the contents, so that its architecture can be edited independently,
breaking the link to the referenced model.
inlineComponent(comp(2));
Clean up the model.
Simulink.BlockDiagram.arrangeSystem("archModel");
Add Stateflow Behavior to Component and Remove
Add a Stateflow chart behavior to the component named robotComp
within
the current model. Then, remove the behavior.
Create a model archModel.slx
.
model = systemcomposer.createModel("archModel"); systemcomposer.openModel("archModel"); arch = get(model,"Architecture");
Add two components to the model electricComp
and robotComp
. Rearrange the model.
names = ["electricComp","robotComp"]; comp = addComponent(arch,names); Simulink.BlockDiagram.arrangeSystem("archModel")
Add Stateflow chart behavior model to the robotComp
component.
createStateflowChartBehavior(comp(2));
Remove Stateflow chart behavior from the robotComp
component and remove
all contents of the Stateflow chart.
inlineComponent(comp(2),false);
Clean up the model.
Simulink.BlockDiagram.arrangeSystem("archModel");
Input Arguments
component
— Component
component object
Component linked to an architecture model, specified as a systemcomposer.arch.Component
object.
inlineFlag
— Control of contents of component
1
(true
) | 0
(false
)
Control of contents of component, specified as 1
(true
) or 0
(false
).1 (true
)
if contents of the referenced architecture model are copied to the component
architecture and 0 (false
). if the contents are not copied and only
ports and interfaces are preserved.
Data Types: logical
Output Arguments
componentObj
— Component
component object
Component with referenced architecture or behavior removed, returned as a systemcomposer.arch.Component
object.
More About
Definitions
Term | Definition | Application | More Information |
---|---|---|---|
architecture | A System Composer™ architecture represents a system of components and how they interface with each other structurally and behaviorally. |
Different types of architectures describe different aspects of systems. You can use views to visualize a subset of components in an architecture. You can define parameters on the architecture level using the Parameter Editor. | |
root | A root is at the top of an architecture hierarchy. A root architecture has a boundary defined by its architecture ports that surround the system of interest. | The root architecture has a system boundary surrounding your architecture model. You can add architecture ports that define interfaces across the boundary. | |
model | A System Composer model is the file that contains architectural information, such as components, ports, connectors, interfaces, and behaviors. |
Perform operations on a model:
A System Composer model is stored as an SLX file. | Create Architecture Model with Interfaces and Requirement Links |
component | A component is a replaceable part of a system that fulfills a clear function in the context of an architecture. A component defines an architectural element, such as a function, another system, hardware, software, or other conceptual entity. A component can also be a subsystem or subfunction. | Represented as a block, a component is a part of an architecture model that can be separated into reusable artifacts. Transfer information between components with:
| |
port | A port is a node on a component or architecture that represents a point of interaction with its environment. A port permits the flow of information to and from other components or systems. |
| |
connector | Connectors are lines that provide connections between ports. Connectors describe how information flows between components or architectures. | A connector allows two components to interact without defining the nature of the interaction. Set an interface on a port to define how the components interact. |
Term | Definition | Application | More Information |
---|---|---|---|
reference component | A reference component is a component whose definition is a separate architecture model, Simulink behavior model, or Simulink subsystem behavior. A reference component represents a logical hierarchy of other compositions. |
You can synchronize and reuse reference components as Reference Component blocks. There are three types of reference components:
| |
parameter | A parameter is an instance-specific value of a value type. | Parameters are available for inlined architectures and components. Parameters are also available for components linked to model, subsystem, or architecture references that specify model arguments. You can specify independent values for a parameter on each component. | |
subsystem component | A subsystem component is a Simulink subsystem that is part of the parent System Composer architecture model. | Add Simulink subsystem behavior to a component to author a subsystem component in System Composer. You cannot synchronize and reuse subsystem components as Reference Component blocks because the component is part of the parent model. | |
state chart | A state chart diagram demonstrates the state-dependent behavior of a component throughout its state lifecycle and the events that can trigger a transition between states. | Add Stateflow chart behavior to describe a component using state machines. You cannot synchronize and reuse Stateflow chart behaviors as Reference Component blocks because the component is part of the parent model. |
Version History
Introduced in R2019a
See Also
Blocks
Functions
MATLAB-Befehl
Sie haben auf einen Link geklickt, der diesem MATLAB-Befehl entspricht:
Führen Sie den Befehl durch Eingabe in das MATLAB-Befehlsfenster aus. Webbrowser unterstützen keine MATLAB-Befehle.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)