setDataType

Configure data type for the data captured from a signal

Description

setDataType(DC,name,type) specifies the data type, type, for the data captured from a signal, name.

Input Arguments

collapse all

Data capture System object, specified as an hdlverifier.FPGADataReader System object. You can create this type of System object by using the FPGA Data Capture Component Generator app.

Specify a signal name matching one that you configured when you generated the object. The signal must be configured as a data signal.

The bit width of the data type must match the bit width of the captured signal. This size is the width you specified for the port on the generated IP.

Introduced in R2017a