Einrichtung des Modells

Konfigurieren des Modells für die automatische Optimierung im Control System Tuner

Mit Control System Tuner können Sie jede Regelungsarchitektur optimieren, die durch LTI-Modelle oder ein verallgemeinertes Zustandsraummodell in MATLAB^® modelliert wurde. Wenn Sie über die Software Simulink^® Control Design™ verfügen, können Sie Ihre Regelungsarchitektur in Simulink modellieren und sie im Control System Tuner optimieren. Informationen zu den ersten Schritten finden Sie unter Specify Control Architecture in Control System Tuner.

Apps

Control System Tuner

Tune fixed-structure control systems

Themen

Einrichtung zum Optimieren von Simulink-Modellen

Open Control System Tuner for Tuning Simulink Model
Access Control System Tuner app from the Simulink Editor.
Specify Operating Points for Tuning in Control System Tuner
Specify the operating conditions at which Control System Tuner computes system responses and tunes controller parameters for a Simulink model.
Specify Blocks to Tune in Control System Tuner
Specify which blocks in your Simulink are the controller elements that you want to tune.
View and Change Block Parameterization in Control System Tuner
View and edit the parameterization that Control System Tuner applies to each block that you designate for tuning.
How Tuned Simulink Blocks Are Parameterized
Both Control System Tuner and the slTuner interface automatically assign predefined parameterizations to certain Simulink blocks.

Einrichtung zum Optimieren von MATLAB-Modellen

Specify Control Architecture in Control System Tuner
Control architecture comprises the control elements of your system, filter and sensor components, the plant under control, and the interconnections among all these elements.
Setup for Tuning Control System Modeled in MATLAB
To model your control architecture in MATLAB for Control System Tuner, construct a tunable model of the control system that identifies and parameterizes its tunable elements.
View and Change Block Parameterization in Control System Tuner
View and edit the parameterization that Control System Tuner applies to each block that you designate for tuning.

Analysepunkte

Mark Signals of Interest for Control System Analysis and Design
Analysis points allow you to access to internal signals, perform open-loop analysis, or specify requirements for controller tuning in systems modeled in either MATLAB or Simulink.