Jan Houska
Humusoft s.r.o.
Statistik
RANG
212
of 300.365
REPUTATION
474
BEITRÄGE
0 Fragen
168 Antworten
ANTWORTZUSTIMMUNG
0.00%
ERHALTENE STIMMEN
61
RANG
4.074 of 20.933
REPUTATION
361
DURCHSCHNITTLICHE BEWERTUNG
4.80
BEITRÄGE
1 Datei
DOWNLOADS
1
ALL TIME DOWNLOADS
3421
RANG
of 168.262
BEITRÄGE
0 Probleme
0 Lösungen
PUNKTESTAND
0
ANZAHL DER ABZEICHEN
0
BEITRÄGE
0 Beiträge
BEITRÄGE
2 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
30
BEITRÄGE
0 Highlights
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
Simulation freezes after exiting fullscreen mode in VR Sink (Simulink Desktop Real-Time)
Hi Giada, could you please post the exact text of the error shown in the Command Window when you exit fullscreen mode? This wil...
5 Tage vor | 0
Issues with EMG Signal Acquisition via Simulink Desktop Real-Time (SDRT) and DAQ Board Usage
Hello, you are correct that USB-based data acquisition boards are not supported with Simulink Desktop Real-Time. However, PCIe ...
6 Monate vor | 0
Matlab got stuck in real time
Hi Hassan, it would be probably best to contact technical support with this question. There are multiple reasons why the real-t...
8 Monate vor | 0
How to interact with a SLDRT (Kernel mode) simulation using TCP/IP
Hello Howard, Simulink Desktop Real-Time is designed in such a way that the real-time code runs on the same computer as MATLAB ...
11 Monate vor | 0
The data in CAN FD protocol doesn’t sent correctly in SLDRT for PCI Express Peak card
Hi Mojtaba, the CAN FD mode must be enabled in the Board Setup dialog by checking the Use CAN FD checkbox. Have you checked thi...
11 Monate vor | 0
Interference between channels in the Analogue Input block of Simulink Desktop Real-Time
Hi Fabrizio, first, please check if your signals are correctly grounded. Are you using single-ended, NRSE, or differential inpu...
11 Monate vor | 0
Is it possible to use xpcapi.h calls with Simulink Desktop Real Time?
Hello Howard, xpcapi.h is specific to Simulink Real-Time and you cannot use it with Simulink Desktop Real-Time. However, there ...
11 Monate vor | 1
Error: The board 'Standard Devices Joystick' has no Stream Input channels.
Hi, please use the Analog Input block for joystick axes and Digital Input block for joystick buttons. The joystick device indee...
12 Monate vor | 0
I use the Desktop real time toolbox to run the model on its core, but why is the progress of the run always 0?
Hello, this looks like the real-time kernel is unable to attach to the hardware timer of your computer and its internal timing ...
etwa ein Jahr vor | 0
Simulink Desktop Real-Time Kernel error: Maximum supported number of timers exceeded?
Hi @Seigan, for Packet Input block, the issue is that you don't know the number of received messages in advance. Or do you? If ...
etwa ein Jahr vor | 0
Simulink Desktop Real-Time Kernel error: Maximum supported number of timers exceeded?
Hello Seigan, just a comment to the Real-Time Sync block: if a Packet Output block (or other similar block) has a positive valu...
etwa ein Jahr vor | 0
Simulink Desktop Real-Time Kernel error: Maximum supported number of timers exceeded?
Hi Seigan, there is a maximum of 128 timers available in the Simulink Desktop Real-Time kernel. This number is fixed in the cod...
etwa ein Jahr vor | 1
| akzeptiert
CPU usage 100% when I use simulink desktop real time, both in connected mode and kernel mode
Hello, this behavior is normal, expected, and not a problem. Windows computes the CPU utilization by measuring the percentage ...
etwa ein Jahr vor | 0
| akzeptiert
How can we read CAN message through Kvaser's CAN Device by Packet Input block in Simulink Desktop Real-Time?
Hello, to read raw CAN data, Vehicle Network Toolbox should not be needed. You will need to specify the output data types (deco...
mehr als ein Jahr vor | 0
| akzeptiert
Simulink communication with a second, real time process on the same Windows PC
Hi Louis, UDP is certainly a viable way to communicate between two processes on the same PC, no matter the real time. Whether S...
mehr als ein Jahr vor | 0
c-mex S-Function error in desktop real-time external mode: Error occurred while executing External Mode MEX-file 'sldrtext': Error loading real-time image: undefined symbol
Hi You-Cheng, this is because the external mode build system does not know that it should include the file myadd.c to the list ...
mehr als ein Jahr vor | 0
| akzeptiert
Undefined function or method 'sldrtkernel' for input arguments of type 'char'
Hi Ali, in R2009b, the product name was Real-Time Windows Target and the function name was rtwintgt. So please try rtwintgt -i...
mehr als ein Jahr vor | 0
| akzeptiert
How do I prevent sldrtkernel -install from hanging?
Hi Jay, it is possible that the real-time kernel service is busy communicating with another process which prevents it from bein...
mehr als ein Jahr vor | 0
Setup board or select board via popup in Simulink Desktop Real Time packet library
Hi Khalid, the driver-related parameters of the Packet Output block are specific for individual drivers and undocumented for pr...
mehr als ein Jahr vor | 0
| akzeptiert
R2024a Prerelease will not start due to OpenGL Startup Plugin Fatal Error
Hi, please go to Windows Defender and restore the file "C:\Program Files\MATLAB\R2024a\bin\win64\ddux.dll". It has been falsely...
fast 2 Jahre vor | 3
| akzeptiert
How to implement Ethernet Communication in Simulink Desktop Real-Time
Hi Chuguang, this means that you are using a very old version of MATLAB. TCP protocol support has been added in R2018a, almost ...
fast 2 Jahre vor | 0
How to implement Ethernet Communication in Simulink Desktop Real-Time
Hi Chuguang, it depends on what you mean by Ethernet Communication. If you mean UDP or TCP/IP (which both often work over Ether...
fast 2 Jahre vor | 0
| akzeptiert
Simulink Desktop Real-Time Analog support for custom NI boards
Hi Fabian, if you are OK with using the Connected IO mode of Simulink Desktop Real-Time, you can try to use the block Data Acqu...
fast 2 Jahre vor | 1
Using the block "Counter input" to measure the signal from a quadrature encoder
Hi Tobias, this typically happens when there are spurious pulses present at the encoder input pins. The most common source of s...
etwa 2 Jahre vor | 0
Which Linux kernel is compatible with Simulink Desktop Real-Time?
Hi Diego, please see the folder names in toolbox/sldrt/kernel/glnxa64 . They correspond to supported kernel versions. For Ubunt...
etwa 2 Jahre vor | 1
Using the block "Counter input" to measure the signal from a quadrature encoder
Hi Tobias, instead of the Counter Input block, you should be using the Encoder Input block to read data from the counter in qua...
etwa 2 Jahre vor | 0
Writing TLC for Level 2 M files s function
Hi Faisal, unfortunately you will not be able to write a TLC for this function that would be usable in Simulink Desktop Real-Ti...
etwa 2 Jahre vor | 0
| akzeptiert
Simulink Desktop Real-Time and UDP communication with Python
Hi Matteo, just some random thoughts that may or may not help you with your problem: All Simulink Desktop Real-Time blocks syn...
mehr als 2 Jahre vor | 0
| akzeptiert
Simulink model is not communicating with EtherCAT device despite no errors
Hi, Simulink Desktop Real-Time has no EtherCAT support that I know of. If you are using EtherCAT blocks from a library of a dif...
mehr als 2 Jahre vor | 1
Manual Switch management for Simscape simulation
Hi, for the first issue, if the discontinuity is the problem, a simple first-order delay should do the trick. However, feeding ...
mehr als 2 Jahre vor | 0
