Confuction with cutoff frequency

6 Ansichten (letzte 30 Tage)
Juan Chehin
Juan Chehin am 5 Aug. 2021
Kommentiert: Star Strider am 6 Aug. 2021
Hello, I have this code that is from a chebyshev filter and I need to know if what is marked in red on the graph corresponds to the cutoff frequencies
Fs = 4400;
Fn = Fs/2;
n = 3; Rp = 0.5;
Wn = [250 2000]/Fn;
[b a]=cheby1(n,Rp,Wn,'bandpass')
[h,w]=freqz(b,a)
plot(w,abs(h))

Akzeptierte Antwort

Star Strider
Star Strider am 5 Aug. 2021
The first red line (at 0.357) corresponds to the low cutoff frequency. The upper cutoff frequency should be at 2.856, so the second red line (at 2.000) does not correspond to it (or to anything else of significance).
.
  10 Kommentare
Juan Chehin
Juan Chehin am 6 Aug. 2021
Bearbeitet: Juan Chehin am 6 Aug. 2021
One last question, the red line of the cutoff frequency that you put, I see that on the y axis cuts at 0.9. Shouldn't it cut at 0.707? Where the filter gain falls. Green lines
Star Strider
Star Strider am 6 Aug. 2021
I had to refresh my memory with respect to Chebyshev Type 1 filters.
The common practice of defining the cutoff frequency at −3 dB is usually not applied to Chebyshev filters; instead the cutoff is taken as the point at which the gain falls to the value of the ripple for the final time.
So with a passband ripple defined as 0.5 dB, the cutoff frequencies correspond to that amplitude (dotted black line).
Fs = 4400;
Fn = Fs/2;
n = 3; Rp = 0.5;
Wn = [250 2000]/Fn;
[b a]=cheby1(n,Rp,Wn,'bandpass');
[h,w]=freqz(b,a,2^16);
plot(w,mag2db(abs(h)))
hold on
plot(([1;1]*Wn*pi), ([1;1]*ylim).', '-r')
plot(xlim, -0.5*[1 1], ":k")
hold off
grid
ylim([-10, 0])
legend('Passband','Cutof Frequencies', 'Location','S')
.

Melden Sie sich an, um zu kommentieren.

Weitere Antworten (0)

Produkte


Version

R2014b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by