- Here is a detailed description on how to run External mode for serial: Parameter Tuning and Signal Logging with Serial External Mode
- If using serial, you might find this page useful as well: Set Up Serial Communication with Target Hardware.
- If using an XDS100 based board (LaunchPad, controlCards, docking stations, TI evaluation boards, etc.), here is a useful page to setup the serial port of the XDS100: Using the serial adapter of XDS100
C2000 Embedded coder -- Change default time-out
3 views (last 30 days)
Show older comments
I am trying to run a model in external mode, but keep getting the error " Unable to connect to the 'TI Delfino F2833x' target for ..." and " Error occurred while executing External Mode MEX-file 'ext_serial_win32_comm': Failed to connect to the target. A time-out occurred while waiting for the first connect response packet. Possible reasons for the time-out:"
When I type command ticcs into Command Window I get:
Processor type : TMS320C28xx
Processor name : TMS320C2800_0
Running? : No
Board number : 0
Processor number : 0
Default timeout : 10.00 secs
RTDX channels : 0
If I reduce the number of elements in the model, I can connect. I suspect time-out is too low.
How to change time-out?
Antonin on 1 Mar 2017
Usually the External mode time out is more then enough and the fact that you hit it probably means that you have a connection problem. I'm not sure which version of MATLAB you are using and what connection you are trying to use. We support CAN and Serial for TI C2000.
I hope it helps,
More Answers (0)
Find more on Texas Instruments C2000 Processors in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!