The firmware build for the USRP radio at 'LTEN001' is not compatible with the host code build. Update the USRP radio firmware to version '4.2.0.0-vendor'.

Hello. May I ask how to solve this problem?

/////////////////////////////////////////////////////////////////

C:\Users\32393>uhd_usrp_probe

Win32; Microsoft Visual C++ version 14.0; Boost_105900; UHD_003.010.001.000-release

-- Detected Device: B210

-- Loading FPGA image: D:\Download\UHD\share\uhd\images\usrp_b210_fpga.bin... done

-- Operating over USB 3.

-- Detecting internal GPSDO.... No GPSDO found

-- Initialize CODEC control...

-- Initialize Radio control...

-- Performing register loopback test... pass

-- Performing register loopback test... pass

-- Performing CODEC loopback test... pass

-- Performing CODEC loopback test... pass

-- Setting master clock rate selection to 'automatic'.

-- Asking for clock rate 16.000000 MHz...

-- Actually got clock rate 16.000000 MHz.

-- Performing timer loopback test... pass

-- Performing timer loopback test... pass

_____________________________________________________

/

| Device: B-Series Device

| _____________________________________________________

| /

| | Mboard: B210

| | revision: 4

| | product: 2

| | serial: LTEN001

| | name: 3000501960030

| | FW Version: 8.0

| | FPGA Version: 14.0

| |

| | Time sources: none, internal, external, gpsdo

| | Clock sources: internal, external, gpsdo

| | Sensors: ref_locked

| | _____________________________________________________

| | /

| | | RX DSP: 0

| | |

| | | Freq range: -8.000 to 8.000 MHz

| | _____________________________________________________

| | /

| | | RX DSP: 1

| | |

| | | Freq range: -8.000 to 8.000 MHz

| | _____________________________________________________

| | /

| | | RX Dboard: A

| | | _____________________________________________________

| | | /

| | | | RX Frontend: A

| | | | Name: FE-RX2

| | | | Antennas: TX/RX, RX2

| | | | Sensors: temp, rssi, lo_locked

| | | | Freq range: 50.000 to 6000.000 MHz

| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB

| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz

| | | | Connection Type: IQ

| | | | Uses LO offset: No

| | | _____________________________________________________

| | | /

| | | | RX Frontend: B

| | | | Name: FE-RX1

| | | | Antennas: TX/RX, RX2

| | | | Sensors: temp, rssi, lo_locked

| | | | Freq range: 50.000 to 6000.000 MHz

| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB

| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz

| | | | Connection Type: IQ

| | | | Uses LO offset: No

| | | _____________________________________________________

| | | /

| | | | RX Codec: A

| | | | Name: B210 RX dual ADC

| | | | Gain Elements: None

| | _____________________________________________________

| | /

| | | TX DSP: 0

| | |

| | | Freq range: -8.000 to 8.000 MHz

| | _____________________________________________________

| | /

| | | TX DSP: 1

| | |

| | | Freq range: -8.000 to 8.000 MHz

| | _____________________________________________________

| | /

| | | TX Dboard: A

| | | _____________________________________________________

| | | /

| | | | TX Frontend: A

| | | | Name: FE-TX2

| | | | Antennas: TX/RX

| | | | Sensors: temp, lo_locked

| | | | Freq range: 50.000 to 6000.000 MHz

| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB

| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz

| | | | Connection Type: IQ

| | | | Uses LO offset: No

| | | _____________________________________________________

| | | /

| | | | TX Frontend: B

| | | | Name: FE-TX1

| | | | Antennas: TX/RX

| | | | Sensors: temp, lo_locked

| | | | Freq range: 50.000 to 6000.000 MHz

| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB

| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz

| | | | Connection Type: IQ

| | | | Uses LO offset: No

| | | _____________________________________________________

| | | /

| | | | TX Codec: A

| | | | Name: B210 TX dual DAC

| | | | Gain Elements: None

Answer 1

[Karunya Choppara]

Please setup the USB based radio with MATLAB following the instructions on this page

https://in.mathworks.com/help/comm/usrpradio/ug/guided-support-package-hardware-setup.html