Solution of system of nonlinear equations
Ältere Kommentare anzeigen
I have following system of equations to find q1, q2, q3 and q4, which I am unable to solve using solve using matlab 'solve' or 'fsolve' commands. All the values should be positive and should not be exceeding 1.0. Are there any suggestions? Or should I implement newton method to solve it?
eqc1_pre = 91.907*q1 - 1.1978e-14*q3 + 3.534e-14*q1*q3 + 9.1309e+6*(0.007649*q1 + 0.03937*q3)*(0.0038245*q1^2 + 0.03937*q1*q3 + 0.18186*q3^2 - 996.13*q3 - 0.03937*q4 + 1.6325e+7) + 1.819e-13*q3^2 == 0
eqc2_pre = 2914.4*q2 - 875.08*q3 + 3645.7*q2*q3 + 1.3054e+7*(0.007649*q2 + 0.03937*q3)*(0.0038245*q2^2 + 0.03937*q2*q3 + 0.18186*q3^2 - 996.23*q3 - 0.03937*q4 + 1.6325e+7) + 18765.0*q3^2 == 0
eqc3_pre = 3.638e-13*q1*q3 - 875.08*q2 - 9.4963e+8*q3 - 18765.0*q4 - 1.1978e-14*q1 + 37530.0*q2*q3 + 9.1309e+6*(0.03937*q1 + 0.36373*q3 - 996.13)*(0.0038245*q1^2 + 0.03937*q1*q3 + 0.18186*q3^2 - 996.13*q3 - 0.03937*q4 + 1.6325e+7) + 1.3054e+7*(0.03937*q2 + 0.36373*q3 - 996.23)*(0.0038245*q2^2 + 0.03937*q2*q3 + 0.18186*q3^2 - 996.23*q3 - 0.03937*q4 + 1.6325e+7) + 1.767e-14*q1^2 + 1822.8*q2^2 + 260050.0*q3^2 + 7.7808e+12 == 0
eqc4_pre = - 1374.8*q1^2 - 14153.0*q1*q3 - 1965.6*q2^2 - 20235.0*q2*q3 - 158850.0*q3^2 + 8.701e+8*q3 + 34387.0*q4 - 1.4259e+13 == 0
4 Kommentare
Aquatris
am 16 Okt. 2024
You can try numeric approaches like fmincon but I doubt you can solve this since you have values ranging from 1e-14 to 1e12, which many programing languages will have difficulty accuratly representing in a single equation.
Mr. Pavl M.
am 16 Okt. 2024
Bearbeitet: Walter Roberson
am 17 Okt. 2024
clc
clear all;
global st=0; %start of constraint intverval
global lst=1; % end of constraint interval
% 79% Completed:
function F = equations(q)
q1 = q(1);
q2 = q(2);
q3 = q(3);
q4 = q(4);
pi = 3.141592653589793;
F(1) = 91.907945087554152399491554310275*q1 - 6.9530743154589888866367962498927e-42*q3 + 0.000000000000035339972092069079645555751006121*q1*q3 + 0.0000000000001818989403545856475830078125*q3^2 + 9130872.0607999999462988460436463*((25*q1*pi^2)/32258 + (5*q3)/127)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000);
F(2) = 3061.5545338275630699055886034165*q2 - 0.00000000000000000000000052628096743060987461514329634383*q3 + 3645.7069886924359708335725693911*q2*q3 + 18764.877243218995339070902448522*q3^2 + 13054497.238043855951388792124012*((25*q2*pi^2)/32258 + (5*q3)/127)*((25*pi^2*q2^2)/64516 + (5*q2*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000);
F(3) = 0.000000000000363797880709171295166015625*q1*q3 - 0.00000000000000000000000052628096743060987461514329634383*q2 - 949606892.52341601879283837341561*q3 - 18764.877243218995520969842803107*q4 - 1960*q3*(127/(10*pi) + 127/20) - 6.9530743154589888866367962498927e-42*q1 + 37529.754486437990678141804897043*q2*q3 + 9130872.0607999999462988460436463*((5*q1)/127 + (2579522850115110167785284050996441184169*q3)/7091867758382506993386369310657609728000 - 269437024701681245919274115996940028669/270482702025760519408161296220160000)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 13054497.238043855951388792124012*((5*q2)/127 + (2579522850115110167785284050996441184169*q3)/7091867758382506993386369310657609728000 - 269464072971883821971214932126562044669/270482702025760519408161296220160000)*((25*pi^2*q2^2)/64516 + (5*q2*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 0.00000000000001766998604603453982277787550306*q1^2 + 1822.8534943462179854167862846955*q2^2 + 260045.56651039855910887591026306*q3^2 + 7780857152948.6118200978386072826;
F(4) = - 139.29999999999999918073863084391*pi^2*q1^2 - 199.15857468494441639131927665645*pi^2*q2^2 - 14152.879999999999916763044893742*q1*q3 - 20234.511187990352705358038508296*q2*q3 - 158847.98154891714318971301560184*q3^2 + 870095677.35924348389019942898346*q3 + 34387.391187990352622121083402037*q4 - 14258923878318.356547643662453739;
end
function q = steffensen_method(F, q0, tol, max_iter)
global st;
global lst;
q = q0;
for iter = 1:max_iter
Fq = F(q);
q1 = q - Fq;
Fq1 = F(q1);
q2 = q1 - Fq1;
Fq2 = F(q2);
q_new = q - (Fq.^2) ./ (Fq2 - 2*Fq1 + Fq);
if norm(q_new - q) < tol && all (q_new > st & q_new <= lst)
q = q_new;
return;
end
q = q_new;
end
warning('Steffensen method did not converge');
end
function secant_method_optimized()
global st;
global lst;
% Initial guesses
q0 = [1; 1; 1; 1]; % First initial guess
q1 = [1.1; 1.1; 1.1; 1.1]; % Second initial guess
% Tolerance and maximum iterations
tol = 1e-5;
max_iter = 1500;
% Secant method iteration
for iter = 1:max_iter
% Evaluate function at q0 and q1
F0 = equations(q0);
F1 = equations(q1);
% Secant step
q_next = q1 - (F1 .* (q1 - q0)) / (F1 - F0+eps);
% Update guesses
q0 = q1;
q1 = q_next;
% Check for convergence
if norm(q1 - q0,1) < tol && all (q1 > st & q1 <= lst)
fprintf('Converged to solution in %d iterations\n', iter);
disp(q1);
return;
end
end
warning('Secant Method Optimized, Failed to converge in %d iterations\n', max_iter);
end
function q = fixed_point_iteration(q0, tol, max_iter)
global st;
global lst;
q = q0;
for iter = 1:max_iter
q_new = equations(q);
if norm(q_new - q,1) < tol && all (q_new > st & q_new <= lst)
q = q_new;
return;
end
q = q_new;
end
warning('Fixed-point iteration did not converge');
end
%To be continued to fix it:
function q = secant_method(q0, q1, tol, max_iter)
global st;
global lst;
for iter = 1:max_iter
Fq0 = equations(q0);
Fq1 = equations(q1);
q2 = q1 - Fq1 * ((q1 - q0)./(Fq1 - Fq0+eps));
q2(isinf(q2)) = 5000000;
q2 = q2(:,1);
%if sum(sqrt(abs(q2.^2 - q1.^2))) < tol % or norm(q2 - q1) < tol
if norm(q2-q1,1) < tol && all (q_new > st & q_new <= lst)
q = q2;
fprintf('Converged in %d iterations.\n', iter);
return;
end
q0 = q1;
q1 = q2;
end
q = q2;
warning('Secant method did not converge');
end
function q = newton_m(initial_guess, tol, max_iter)
global st;
global lst;
q = initial_guess;
for iter = 1:max_iter
F = equations(q);
J = jacobian(q);
delta_q = sum(-J \ F');
q = q + delta_q';
if norm(delta_q) < tol && all (q > st & q <= lst)
fprintf('Converged in %d iterations.\n', iter);
return;
end
end
fprintf('Did not converge within %d iterations.\n', max_iter);
end
function q = broyden_method(initial_guess, tol, max_iter)
global st;
global lst;
q = initial_guess;
B = eye(length(q)); % Initial Jacobian approximation (identity matrix)
for iter = 1:max_iter
F = equations(q);
F = F(:); % Ensure F is a column vector
delta_q = -B \ F; % Solve for delta_q
q_new = q + delta_q; % Update q
% Check for convergence
if norm(delta_q) < tol && all(q_new > st & q_new <= lst)
fprintf('Converged in %d iterations.\n', iter);
q = q_new;
return;
end
F_new = equations(q_new);
F_new = F_new(:); % Ensure F_new is a column vector
y = F_new - F;
delta_q = delta_q(:); % Ensure delta_q is a column vector
B = B + ((y - B * delta_q)'* delta_q) / (delta_q' * delta_q); % Update Jacobian approximation
q = q_new; % Update q
end
fprintf('Did not converge within %d iterations.\n', max_iter);
end
function q = broyden_methodq(initial_guess, tol, max_iter)
global st;
global lst;
q = initial_guess;
B = eye(length(q)); % Initial Jacobian approximation (identity matrix)
for iter = 1:max_iter
F = equations(q);
delta_q = -B\F';
q_new = q + sum(delta_q');
if norm(delta_q) < tol && all (q_new > st & q_new <= lst)
fprintf('Converged in %d iterations.\n', iter);
return;
end
F_new = equations(q_new);
y = F_new - F;
B = B + ((y - B*delta_q).*delta_q)/(delta_q*delta_q');
q = q_new;
end
fprintf('Did not converge within %d iterations.\n', max_iter);
end
function q = latin_pgd_method(initial_guess, tol, max_iter)
global st;
global lst;
% for LATIN-PGD method implementation
% This is a simplified version and may need adjustments for your specific problem
q = initial_guess
for iter = 1:max_iter
% Solve the local problem
q_local = solve_local_problem(q);
% Solve the global problem
q_global = solve_global_problem(q_local);
% Update the solution
q_new = update_solution(q, q_local, q_global);
% Check for convergence
if norm(q_new - q) < tol && all (q_new > st & q_new <= lst)
fprintf('Converged in %d iterations.\n', iter);
q = q_new;
return;
fprintf('LATIN-PGD method is not fully implemented in this example.\n');
end
end
end
function q_local = solve_local_problem(q)
% Placeholder for solving the local problem
% Implement the local problem solution here
q_local = q; % Example placeholder
end
function q_global = solve_global_problem(q_local)
% Placeholder for solving the global problem
% Implement the global problem solution here
q_global = q_local; % Example placeholder
end
function q_new = update_solution(q, q_local, q_global)
% Placeholder for updating the solution
% Implement the solution update here
q_new = (q_local + q_global) / 2; % Example placeholder
end
function u_corr = latin_pgd_complete(initial_guess)
global st;
global lst;
% Problem parameters
maxIter = 400; % Maximum number of iterations
tol = 1e-6; % Tolerance for convergence
% Initial guess
u = initial_guess;
% LATIN-PGD iteration
for iter = 1:maxIter
% Prediction step
u_pred = prediction_step(u);
% Correction step
u_corr = correction_step(u_pred);
% Check for convergence
if norm(u_corr - u,3) < tol && all (q_new > st & q_new <= lst)
fprintf('Converged to solution in %d iterations\n', iter);
#disp(u_corr);
return;
end
% Update solution
u = u_corr;
end
warning('Failed to converge in %d iterations\n', maxIter);
end
function u = initial_guess()
% Define an initial guess for the solution
u = rand(4, 1); % Example with random initial guess, adapted to 4 variables
end
function u_pred = prediction_step(u)
% Prediction step of the LATIN method
% Example: using a simplified linear model for prediction
% Here we assume a linear relationship for illustration purposes
J = jacobian(u);
F = equations(u);
u_pred = u - J./(eps+F); %F*inv(J); % Update with actual prediction logic
end
function u_corr = correction_step(u_pred)
% Correction step of the LATIN method
% Example: applying correction using nonlinear residuals
F = equations(u_pred);
u_corr = u_pred - 0.01 * F; % Update with actual correction logic
end
function root = bisection_method(a, b, tol, max_iter,q)
global st;
global lst;
if equations(q+a) * equations(q+b)' >= 0
error('The function must have different signs at a and b');
end
for iter = 1:max_iter
c = (a + b) / 2;
q = q+c;
root = equations(q);
if root == 0 || (b - a) / 2 < tol && all (q > st & q <= lst)
fprintf('Converged in %d iterations.\n', iter);
return;
end
if equations(q)*equations(q)' < 0
b = c;
else
a = c;
end
end
warning('Did not converge within the maximum number of iterations');
end
%Whether next Jacobians are correct (Fill in with your computed Jacobians):
function J = jacobian(q)
%{
##q1 = q(1);
##q2 = q(2);
##q3 = q(3);
##q4 = q(4);
%}
pi = 3.141592653589793;
J = zeros(4, 4);
n = length(q);
J = zeros(n, n);
h = 1e-6; % Step size for finite differences
for i = 1:n
for j = 1:n
q1 = q;
q2 = q;
q1(j) = q1(j) + h;
q2(j) = q2(j) - h;
J(i, j) = (equations(q1)(i) - equations(q2)(i)) / (2 * h);
end
end
% Partial derivatives for the first equation
%{
##J(1, 1) = 91.907945087554152399491554310275 + 0.000000000000035339972092069079645555751006121*q3 + 9130872.0607999999462988460436463*((25*pi^2)/32258)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 9130872.0607999999462988460436463*((25*q1*pi^2)/32258)*((50*pi^2*q1)/64516 + (5*q3)/127); ##J(1, 2) = 0;
##J(1, 3) = -6.9530743154589888866367962498927e-42 + 0.000000000000035339972092069079645555751006121*q1 + 0.000000000000363797880709171295166015625*q3 + 9130872.0607999999462988460436463*((5)/127)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 9130872.0607999999462988460436463*((25*q1*pi^2)/32258)*((5*q1)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669)/270482702025760519408161296220160000);
##J(1, 4) = -9130872.060799999946298846043646
##% Partial derivatives for the second equation
##J(2, 1) = 0;
##J(2, 2) = 3061.5545338275630699055886034165 + 3645.7069886924359708335725693911*q3 + 13054497.238043855951388792124012*((25*pi^2)/32258)*((25*pi^2*q2^2)/64516 + (5*q2*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 13054497.238043855951388792124012*((25*q2*pi^2)/32258)*((50*pi^2*q2)/64516 + (5*q3)/127);
##J(2, 3) = -0.00000000000000000000000052628096743060987461514329634383 + 3645.7069886924359708335725693911*q2 + 37529.754486437990678141804897043*q2 + 13054497.238043855951388792124012*((5)/127)*((25*pi^2*q2^2)/64516 + (5*q2*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 13054497.238043855951388792124012*((25*q2*pi^2)/32258)*((5*q2)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669)/270482702025760519408161296220160000);
##J(2, 4) = -13054497.238043855951388792124012*((25*q2*pi^2)/32258)*((5)/127);
##% Partial derivatives for the third equation
##%J(3, 1) = 0.000000000000363797880709171295166015625*q3 - 6.9530743154589888866367962498927e-42 + 9130872.0607999999462988460436463*((5)/127)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (2579522850115110167785284050996441184169*q3^2)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669*q3)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 9130872.0607999999462988460436463*((25*q1*pi^2)/32258)*((5*q1)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669)/270482702025760519408161296220160000);
##%J(3, 2) = -0.00000000000000000000000052628096743060987461514329634383 + 37529.754486437990678141804897043*q3 + 1822.8534943462179854167862846955*q2;
##%J(3, 3) = 0.000000000000363797880709171295166015625*q1 - 949606892.52341601879283837341561 - 1960*(127/(10*pi) + 127/20) + 37529.754486437990678141804897043*q2 + 9130872.0607999999462988460436463*((5*q1)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669)/270482702025760519408161296220160000)*((25*pi^2*q1^2)/64516 + (5*q1*q3)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269437024701681245919274115996940028669)/270482702025760519408161296220160000 - (5*q4)/127 + 1010469987441913066378883825611918454307/61897001964269013744956211200000) + 13054497.238043855951388792124012*((5*q2)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000 - (269464072971883821971214932126562044669)/270482702025760519408161296220160000)*((25*pi^2*q2^2)/64516 + (5*q2*q3)/127 + (5159045700230220335570568101992882368338*q3)/14183735516765013986772738621315219456000
%Fill-in with your:
%J(3,4) =
%J(4,1) =
%J(4,2) =
%J(4,3) =
%J(4,4) =
%}
end
% Initial guess for the variables q1, q2, q3, q4
initial_guess = [0; 6; 1; -1];
% Solve the equations
%[q, fval, info] = fsolve(@equations, initial_guess);
tol = 1e-7; % Tolerance for convergence
max_iter = 500; % Maximum number of iterations
% Run the Newton's method
solution1 = newton_m(initial_guess, tol, max_iter);
disp('Solution Newton-Rhapson method:');
disp(solution1);
solution2 = latin_pgd_complete(initial_guess);
disp('Solution LATIN-PGD method:');
disp(solution2);
solution3 = broyden_method(initial_guess, tol, max_iter);
disp('Solution Broyden method:');
disp(solution3);
q0 = [0; 1; 1; 1]; % Initial guess
q1 = [2; 0; -2; 2]; % Second guess
tol = 1e-4; % Tolerance
max_iter = 1000; % Maximum number of iterations
solution4 = secant_method(q0, q1, tol, max_iter);
disp('Solution Secant method:')
disp(solution4);
q0 = [0; 1; -1; 2]; % Initial guess
tol = 1e-4; % Tolerance
max_iter = 10000; % Maximum number of iterations
solution5 = fixed_point_iteration(q0, tol, max_iter);
disp('Solution fixed point iteration methode:')
disp(solution5);
%solution_latin_pgd = latin_pgd_method(initial_guess, tol, max_iter);
%disp('Solution using LATIN-PGD method:');
%disp(solution_latin_pgd);
disp('Secant method optimized')
secant_method_optimized();
disp('Bisections methode:')
a = 1e-14;
b = 1e12;
root = bisection_method(a, b, tol, max_iter,q0);
disp(root)
%Constructed from needing help code by
%https://independent.academia.edu/PMazniker
%+380990535261
%https://diag.net/u/u6r3ondjie0w0l8138bafm095b
%https://github.com/goodengineer
%https://orcid.org/0000-0001-8184-8166
%https://willwork781147312.wordpress.com/portfolio/cp/
%https://www.youtube.com/channel/UCC__7jMOAHak0MVkUFtmO-w
%https://nanohub.org/members/130066
%https://pangian.com/user/hiretoserve/
%https://substack.com/profile/191772642-paul-m
Please be attentive and careful with digital items, electronic artifacts and network logs and records.
If you correctly pay attention, review logs and records, you will see the truth.
I once completed full Newton Rhapson iterative procedure set for solving real world physics system of non-linear equations in TCE Matlab without any AI companionship and delivered it.
Who are they, others? What did they do? No, not that not. I do ok of course. Alternatives to Newton Rhapson:
There are several alternatives to the Newton-Raphson method for solving nonlinear equations.
I tested(checked) it in TCE.
A few specific functions to solution to your specific questions are fully completed by me. I need substantial support to complete it. It is ok and reasonable and even mission and normal life balancee supporting critical to hire me.
John D'Errico
am 16 Okt. 2024
Answers is not a job seeking forum. Please do not put requests for someone to hire you in your posts. I've removed them for you.
Antworten (3)
John D'Errico
am 17 Okt. 2024
Bearbeitet: John D'Errico
am 17 Okt. 2024
This will be literally impossible to do in double precision, given the huge dynamic range of those coefficients. But we can look to see if it is even likely a solution does exist.
syms q [4,1]
eqc_pre(1) = 91.907*q1 - 1.1978e-14*q3 + 3.534e-14*q1*q3 + 9.1309e+6*(0.007649*q1 + 0.03937*q3)*(0.0038245*q1^2 + 0.03937*q1*q3 + 0.18186*q3^2 - 996.13*q3 - 0.03937*q4 + 1.6325e+7) + 1.819e-13*q3^2;
eqc_pre(2) = 2914.4*q2 - 875.08*q3 + 3645.7*q2*q3 + 1.3054e+7*(0.007649*q2 + 0.03937*q3)*(0.0038245*q2^2 + 0.03937*q2*q3 + 0.18186*q3^2 - 996.23*q3 - 0.03937*q4 + 1.6325e+7) + 18765.0*q3^2;
eqc_pre(3) = 3.638e-13*q1*q3 - 875.08*q2 - 9.4963e+8*q3 - 18765.0*q4 - 1.1978e-14*q1 + 37530.0*q2*q3 + 9.1309e+6*(0.03937*q1 + 0.36373*q3 - 996.13)*(0.0038245*q1^2 + 0.03937*q1*q3 + 0.18186*q3^2 - 996.13*q3 - 0.03937*q4 + 1.6325e+7) + 1.3054e+7*(0.03937*q2 + 0.36373*q3 - 996.23)*(0.0038245*q2^2 + 0.03937*q2*q3 + 0.18186*q3^2 - 996.23*q3 - 0.03937*q4 + 1.6325e+7) + 1.767e-14*q1^2 + 1822.8*q2^2 + 260050.0*q3^2 + 7.7808e+12;
eqc_pre(4) = - 1374.8*q1^2 - 14153.0*q1*q3 - 1965.6*q2^2 - 20235.0*q2*q3 - 158850.0*q3^2 + 8.701e+8*q3 + 34387.0*q4 - 1.4259e+13;
vpa(eqc_pre(:),4)
UGH. But we can look at whether it is likely a solution even exists in the hyper-box [0,1]^4.
double(subs(eqc_pre,q,rand(4,1)))
double(subs(eqc_pre,q,rand(4,1)))
double(subs(eqc_pre,q,rand(4,1)))
However, I would point out that having substituted three sets of random numbers into those equations, almost always equation 3 tends to run about 3.6e17, and those computations were performed in high precision.
eq3 = matlabFunction(eqc_pre(3))
eq3val = eq3(rand(1000000,1),rand(1000000,1),rand(1000000,1),rand(1000000,1));
min(eq3val)
max(eq3val)
This is enough to convince me that no solution exists in that region, since any of a set of 1e6 random points in the box NEVER see any deviation from a very narrow range, that is very far from zero.
Mr. Pavl M.
am 17 Okt. 2024
Bearbeitet: Mr. Pavl M.
am 17 Okt. 2024
0 Stimmen
Here, I've solved it in more than 4 methods, for specific equations' system approximated solutions found with fixed interval constraints [a,b] added as per requirements plan:
A.1: Runs:
I've corrected, revamped functionality, amended the software program running codes presented in my comment above.
Working codes in Matlab compatible T.C.E. (fles SystemOfNonlinEqSolver1.m, newton_method.m, fronext.m, ...+):
Pictures are worth than thouthands words.I have the corresponding, according to specifications software program code maintaining running on file disk storage controller electronic unit processed machine. I developed them. They are for sale, if you need the software program codes running, contact me more + for more.
Kategorien
Mehr zu Newton-Raphson Method finden Sie in Hilfe-Center und File Exchange
am 17 Okt. 2024
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
