Filter löschen
Filter löschen

Multiple Simulink runs only changing signal vector

2 Ansichten (letzte 30 Tage)
Martin Ryba
Martin Ryba am 20 Sep. 2023
I'm much more practiced at MATLAB than Simulink, but this problem has stumped me on a few models. I do signal processing and am using Simulink->HDL Coder so doing more in Simulink. I want to sometimes run "Monte Carlo" runs of a model with randomized signal streams to for instance calculate Probability of Detection. However, I've tried From Workspace blocks and Signal From Workspace and any time you simply rebuild the signal vector it triggers a model recompile. I want to be able to have a simple iteratative loop (and ability to parfor would be nice) that builds the signal, calls sim() (preferably in 'rapid' mode) and then parses the output, without recompiling every time. Is Binary File Reader the only viable option? The parsim() documentation talks about establishing Configuration Sets but that seems very confusing and I'm not sure it avoids the problem. Examples that have solved this would be most helpful.

Akzeptierte Antwort

Murali Yeddanapudi
Murali Yeddanapudi am 26 Sep. 2023
Hi Martin:
Bharath brought your quesiton to my attention.
Firstly you are correct that changing the From Workspace variable causes the rapid-accelerator target rebuilt. We plan to fix this in a future release so that it does not rebuild and works as you expect with RapidAcceleratorUpToDateCheck off.
In the latest release, R2023b, using the root-level input port to feed the input sequence can avoid rebuild. I have attached a modified version of the example (that Bharath linked above) to demo this approach.
Best Regarfs
Murali
  3 Kommentare
Murali Yeddanapudi
Murali Yeddanapudi am 27 Sep. 2023
Bearbeitet: Murali Yeddanapudi am 27 Sep. 2023
Changing a Constant block's value from run-to-run should not trigger a rebuild. If you can send us reproduction steps (with the necessary files), I can look into it.
The wall clock execution time in accelerator (or rapid accelerator) mode can be longer in some cases, if the computational content of the model is dominated by precompiled/optimized blocks implemented a C-Mex S-Functions. Not sure if this applies in your case, if you can send an example, we can dig into it and see if we can speed up the accelerator modes.
Martin Ryba
Martin Ryba am 27 Sep. 2023
Thanks Murali, when I built a simpler model using that same sample writer and constant block you're correct it didn't force a recompile. I'm getting a fairly generic "Generated code was out of date." reason. Running through the checksum process, I finally located the culprit: my test sample generator was inadvertently generating a buffer that changed length each interation (a variable delay at the front to test Time of Arrival computation). When I forced it to fixed length, that cleared it up. Thanks!

Melden Sie sich an, um zu kommentieren.

Weitere Antworten (1)

Bharath Venkataraman
Bharath Venkataraman am 20 Sep. 2023
This example shows how to accelerate BER measurements for HDL LTE Turbo Decoder model with data from MATLAB feeding a Simulink model. Does this help?
  3 Kommentare
Bharath Venkataraman
Bharath Venkataraman am 24 Sep. 2023
I will check with some of the Simulink folks to see what the best approach is. One thing you could try is to put most of the model into another model and use model reference. That may reduce the time for the model compilation since the top level model will be pretty simple (assuming the model reference will need no compilation).
Martin Ryba
Martin Ryba am 24 Sep. 2023
Yes, we already do that. The "test bench" model is pretty much just stimulus and data recording; the core is incorporated by reference and is what is set up to be converted by HDL Coder. I tried to see if Root Level Input ports provide a good mechanism, but that doesn't seem to be well configured for simulation input vectors/buffers. The incorporation of flow control is, I understand, an extra wrinkle (what makes defining them as timeseries/timetables a problem) but one that needs to be thought through as a normal use case.

Melden Sie sich an, um zu kommentieren.

Produkte


Version

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by