Filter löschen
Filter löschen

Bitstream generation problem in HDL coder

16 Ansichten (letzte 30 Tage)
KW YAN
KW YAN am 27 Jun. 2022
Beantwortet: KW YAN am 21 Jul. 2022
Hi,
I am using HDL coder and trying to run a FIL test in my zedboard but encountering an issue that the bitstream is not showing up after everything in HDL coder run successfully, no critical warning or errors showing up.
If I use the HDL project generated by Matlab and run it in vivado for the bitstream generation, it is working and I can run the FIL test with that “manually generated” bitstream in Simulink.
So, the missing step now I have is the bitstream is missing at the end of HDL coder. Hope any of you could help to resolve this issue. Thanks a lot!
Note: the DUT I am trying to convert is only consisting a discrete time transfer function, nothing very complicated.
Best Regards,
Kelvin Yan

Akzeptierte Antwort

KW YAN
KW YAN am 21 Jul. 2022
Hi all,
After spending quite some time in investigation and some support from Mathworks, it is figured out that the software "xterm" is needed on Linux for triggering the pop-up window, which will then compile the bitstream file. If anyone is suffereing such a problem, you might try to install this software on your machine. Hope this helps!
Best Regards,
Kelvin

Weitere Antworten (3)

Kiran Kintali
Kiran Kintali am 29 Jun. 2022
Is it possible to attach a sample model?
Feel free to reach out to MathWorks technical support on this question.
  1 Kommentar
KW YAN
KW YAN am 5 Jul. 2022
Hi Kiran,
I now upload the model for your reference, the DUT is the block called "controller" inside the Simulink model. You would need to run the "run_simple_model.m" script for initialization. Hope it helps! Thanks!
Best Regards,
Kelvin

Melden Sie sich an, um zu kommentieren.


YP
YP am 29 Jun. 2022
Bearbeitet: YP am 29 Jun. 2022
At the last step in HDL Workflow Advisor, the FIL project will be synthesized, and then an external shell will pop up to continue with implementation and bit generation.
Do you notice the external shell?
  1 Kommentar
KW YAN
KW YAN am 5 Jul. 2022
Hi YP,
No we dont see any pop-up at the end of the generation process.Very likely the part which runs the .tcl file is not started.
Best Regards,
Kelvin

Melden Sie sich an, um zu kommentieren.


KW YAN
KW YAN am 29 Jun. 2022
Hi Both,
Thanks for the response. I have already created a technical support request, I think you could see that in your system?
I would need some time to tidy up the model before I could upload it, maybe I would put it inside the technical request ticket.
However, I do locate the problem that should be because of the .tcl file for generating bitstream at the end was not running, also probably because of this reason, I didnt see a pop-up terminal at the last step of HDL Workflow Advisor.
If I would "manually" run that tcl script and use the generated bitstream and link it in the FIL block, then everything works fine. So, I guess it does not relates to my model but just with strange reason, that .tcl file was not running successfully.
Hope this could give you already some insights.
Best Regards,
Kelvin

Produkte


Version

R2022a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by