Thingspeak ESPHome configuration error
8 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi all,
my esphome which is correctly reading pH values, should send it's info to thingspeak using mqtt protocol. In the logs, it's shortly connecting and immediately disconnecint: TCP disconnected My current config is as follows
mqtt:
broker: mqtt3.thingspeak.com
username: usernamefromMQTT
password: passwordfromMQTT
client_id: ClienIDFromMQTT
discovery: 'false'
discovery_retain: 'false'
interval:
- interval: 3sec
then:
- mqtt.publish:
topic: channels/channelID/publish/WriteAPIKey
payload: field1=pH
sensor:
- platform: ads1115
multiplexer: 'A0_GND'
gain: 6.144
id: pH
name: "pH measurement"
unit_of_measurement: "pH"
accuracy_decimals: 1
state_class: "measurement"
update_interval: 1s
retain: false
filters:
- calibrate_linear:
- 0.00 -> 0.0
- 2.363 -> 7.0
- 5.00 -> 14.0
0 Kommentare
Antworten (1)
Christopher Stapels
am 2 Mai 2022
Bearbeitet: Christopher Stapels
am 2 Mai 2022
Your topic syntax is incorrect. The syntax has changed from the previous MQTT broker. Have a look at the MQTT publish to a feed documentation for the correct syntax. Make sure you enable the device to publish to the channel you intend in the MQTT devices section.
2 Kommentare
Christopher Stapels
am 2 Mai 2022
looks better! Did you add the channel to your MQTT device permissions? If so, I think it should work.
Do you have a paid license? If not, the interval (3 seconds) is too small, you can only publish every 15 seconds for a free license, and you would be wasting seerver time with the extra requests.
Communitys
Weitere Antworten in ThingSpeak Community
Siehe auch
Kategorien
Mehr zu Write Data to Channel finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!