fill a polygon with a hole
6 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Qingping
am 26 Feb. 2014
Beantwortet: Steven Lord
am 19 Sep. 2019
data=[
0.5, 0.8;
1.0, 0.0;
0.0, 0.0;
0.5, 0.8;
0.5, 0.4;
0.1, 0.1;
0.7, 0.1;
0.5, 0.4;
];
h=fill(data(:,1),data(:,2),'r')
the image is:
there is a line between dot(0.5,0.8) and (0.5,0.4) how to delete this line in prefectly? such as
I used the code set(h,'EdgeColor','r') to disappear this line.
2 Kommentare
Akzeptierte Antwort
lvn
am 28 Feb. 2014
Alternatively, you can remove all black lines (like that the figure looks good to me)
h=fill(data(:,1),data(:,2),'r','Linestyle','none')
0 Kommentare
Weitere Antworten (2)
Image Analyst
am 26 Feb. 2014
Simply get rid of the last 5 rows of your data.
data=[
0.5, 0.8;
1.0, 0.0;
0.0, 0.0;
];
h=fill(data(:,1),data(:,2),'r')
That's so simple I guess I'm missing something, or you are.
4 Kommentare
Patrik Ek
am 3 Mär. 2014
Bearbeitet: Patrik Ek
am 3 Mär. 2014
@Image Analyst: That was not expected, that matlab would not handle the case of polygons with holes, when plotting. I will remove my answer. I also did some research since it felt a bit incredulous that matlab could not do this. However the solution proposed by you were the most commonly recommended. +1 for that
@Qingping: Answer one is is of course the simplest one. However, to keep direction of the polygons you can check the direction or windiness or what you prefer to call it. The dierction should be opposite if the polygons are properly defined. Depending on standard the direction of the outer polygon may vary, but mathematics it is most often defined counter clockwise. However, MATLAB does in a number of occations define it the other way around (eg in mapping toolbox since this is more or less standard when working with maps)
Steven Lord
am 19 Sep. 2019
Consider creating and plotting a polyshape. You will receive a warning but depending on how you've generated your data you may be able to avoid this.
data=[
0.5, 0.8;
1.0, 0.0;
0.0, 0.0;
0.5, 0.8;
0.5, 0.4;
0.1, 0.1;
0.7, 0.1;
0.5, 0.4;
];
p = polyshape(data);
plot(p)
Or, if you're building the outermost shape then subtracting away the inner holes:
outer=[
0.5, 0.8;
1.0, 0.0;
0.0, 0.0;
0.5, 0.8];
outerP = polyshape(outer);
hole = [
0.5, 0.4;
0.1, 0.1;
0.7, 0.1;
0.5, 0.4;
];
holeP = polyshape(hole);
totalP = subtract(outerP, holeP);
plot(totalP)
0 Kommentare
Siehe auch
Kategorien
Mehr zu Elementary Polygons finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!