Noise Cancellation Without reference signal
19 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Anyone here have done the Noise Cancellation Without reference signal. Please share the Matlab code. Thank you
1 Kommentar
Neil Taylor
am 4 Okt. 2019
An old post but DD above is correct. Also look for Adaptive self-tuning filters, and self-tunning Kalman filters.
Antworten (3)
Image Analyst
am 13 Nov. 2013
Bearbeitet: Image Analyst
am 14 Nov. 2013
There are lots of ways to reduce noise without any reference signal. For example convolving with a box/rect filter.
smoothedSignal = conv(noisySignal, ones(1,11)/11, 'same');
Did you have some specific method in mind?
3 Kommentare
Walter Roberson
am 14 Nov. 2013
I checked Google Scholar, but I do not find any papers on the topic "Noise Cancellation Without Reference Signal" ?
Image Analyst
am 14 Nov. 2013
Bearbeitet: Image Analyst
am 14 Nov. 2013
There is no reference signal in my code, just the noisy signal, a box filter (a rect function), and an output signal.
Umair Nadeem
am 14 Nov. 2013
Bearbeitet: Umair Nadeem
am 14 Nov. 2013
You can use a digital lowpass filter to reduce the high frequency noise peaks. Any filter would do the job but a Butterworth filter has a better response because of minimum ripples in the passband.
Sample code:
[num den] = butter(3, wn, 'low');
output = filter(num, den, input);
here take wn = signal_freq/sampling_freq, if you dont know the sampling frequency then take
wn = any value between 0.1 and 0.9 and check the response for the most suitable wn value.
Hope this helps. Your feedback will be appreciated. Thanks
0 Kommentare
jnaumann
am 14 Nov. 2013
It sounds like you are after an Adaptive Linear Enhancer (ALE) - some info given here
0 Kommentare
Siehe auch
Kategorien
Mehr zu Signal Generation and Preprocessing finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!