To log signal values and times, mark signals for logging with the Simulation Data Inspector or add a File Log to your model. See Signal Logging Basics.
A File Log block collects signal data on the target computer that is sent to the development computer after each simulation run. Or, if the target computer is not connected to the development computer, you can upload the data to the development computer when you connect to the target computer.
|Open Simulink Real-Time explorer and interact with target computers and real-time applications|
|Open Simulink Real-Time task execution time (TET) monitor|
|Start file logging of signal data|
|Stop file logging of signal data|
|Get information about available file logs of signal data|
|Import file log data from target computer|
|Delete file log data from target computer|
|Import file logs copied from target computer into Simulation Data Inspector|
|List available file logs copied from target computer|
Acquire signal data while running a real-time application and transfer the data to the development computer for analysis.
Find and view signals and parameters with hierarchical path information.
Data Logging with the Simulation Data Inspector
This example shows how to use a Simulink® Real-Time™ log of signal data and the Simulation Data Inspector. Signals are logged during model execution.
Troubleshoot problems that you encounter while using the Simulink Real-Time product