Anwendungsspezifisch
Ihr SDR kann Signale gemäß diverser Standards senden und empfangen. Verwenden Sie Communications Toolbox™, um verschiedene Over-The-Air-Wellenformen zu generieren und zu empfangen.
Enthaltene Beispiele
Capture RF Data to Baseband File Using ADALM-PLUTO Radio
Capture an FM broadcast signal using an ADALM-PLUTO radio, save the signal to a file as baseband samples, and demodulate the baseband samples.
Airplane Tracking Using ADS-B Signals
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP™ radio, and visualize them on a map with the Mapping Toolbox™.
Airplane Tracking Using ADS-B Signals in Simulink
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
FM Broadcast Receiver
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
FM Broadcast Receiver in Simulink
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
Image Transmission and Reception Using 802.11 Waveform and SDR
Transmit and receive images encoded in IEEE® 802.11™ waveforms using SDR.
Image Transmission and Reception Using LTE Waveform and SDR
Transmit and receive an image using an LTE waveform and a software-defined radio (SDR). The example generates a single or multi-antenna LTE waveform for simultaneous transmission and reception on a single SDR platform. During waveform generation, the example encodes and packs an image into a radio frame. Then, on reception, the example decodes the image from the received LTE waveform.
Automatic Meter Reading
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio.
Automatic Meter Reading in Simulink
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio.
Spectrum Sensing with Deep Learning to Identify 5G, LTE, and WLAN Signals
Train a semantic segmentation network for spectrum monitoring to characterize spectrum occupancy and identify 5G NR and LTE signals in wideband spectrograms using deep learning.
LTE Transmitter Using Software Defined Radio
Generate a reference measurement channel (RMC) downlink (DL) LTE waveform suitable for over-the-air transmission. This example also shows how to use a software-defined radio (SDR) to transmit the generated waveform using single or multiple antennas.
LTE Receiver Using Software-Defined Radio
Recover the master information block (MIB) and basic system information from an over-the-air LTE downlink (DL) waveform. This example also shows how to receive an LTE waveform using a software-defined radio (SDR) with single or multiple antennas.
Ship Tracking Using AIS Signals
Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and display the tracked ships on a map with the Mapping Toolbox.
