Radio I/O

Transmit and receive real-world RF signals

When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single channel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.

Funktionen

`sdrrx`	Create receiver System object for radio hardware
`sdrtx`	Create transmitter System object for radio hardware
`capture`	Capture RF signal data using SDR device (Seit R2019b)
`designCustomFilter`	Design custom filter for Analog Devices AD936x RF chip
`info`	Obtain radio information
`transmitRepeat`	Download waveform to radio and repeatedly transmit it over the air

Blöcke

Pluto Receiver	Receive data from Analog Devices ADALM-PLUTO radio
Pluto Transmitter	Transmit data to Analog Devices ADALM-PLUTO radio

Objekte

`comm.SDRRxPluto`	Receive data from Analog Devices ADALM-PLUTO radio
`comm.SDRTxPluto`	Transmit data to Analog Devices ADALM-PLUTO radio

Themen

Channel I/O
Use ADALM-PLUTO radio channels to send and receive data.
Repeated Waveform Transmitter
Use a transmitter System object™ for repeated signal transmission.
Detect Underruns and Overruns
To detect underruns and overruns, use the lost sample indicator.
Burst Mode
To achieve real time performance, enable burst mode.

Fehlersuche

Common Problems and Fixes

Resolve issues encountered while installing or using the features of the support package.

Enthaltene Beispiele

Capture RF Data to Baseband File Using ADALM-PLUTO Radio

Use the capture function and an ADALM-PLUTO radio to record RF signals for post-capture processing in MATLAB®. Save an FM broadcast signal to a file as baseband samples. Read the file containing the recorded signal and demodulate the baseband samples.

Live Script öffnen