From the series: Power Plant Model Validation (PPMV) with MATLAB and Simulink
Graham Dudgeon, MathWorks
Automated parameter sensitivity is used to assess and rank the influence of system parameters on system response. Reactive-power (PQ) replay and voltage and frequency (VF) replay are used simultaneously for automated parameter sensitivity to gain deeper insights on the effect of parameter changes on system response.
The objective function that is used in both automated parameter sensitivity and automated parameter estimation, compares measured PQVF with simulated PQVF. While magnitude of correlation of a given parameter with the objective function is certainly a factor for selecting a parameter, sensitive parameters may be discounted based on engineering judgement. Once parameters have been selected, automated parameter tuning is performed to provide the best overall fit within selected parameter constraints. Both absolute and relative constraints can be specified in the parameter tuning workflow.
Recorded: 22 May 2017
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.