Statistik
6 Fragen
0 Antworten
RANG
264.417
of 300.781
REPUTATION
0
BEITRÄGE
6 Fragen
0 Antworten
ANTWORTZUSTIMMUNG
33.33%
ERHALTENE STIMMEN
0
RANG
of 21.088
REPUTATION
N/A
DURCHSCHNITTLICHE BEWERTUNG
0.00
BEITRÄGE
0 Dateien
DOWNLOADS
0
ALL TIME DOWNLOADS
0
RANG
of 171.031
BEITRÄGE
0 Probleme
0 Lösungen
PUNKTESTAND
0
ANZAHL DER ABZEICHEN
0
BEITRÄGE
0 Beiträge
BEITRÄGE
0 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
BEITRÄGE
0 Discussions
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
Frage
Why can't Matlab save the acceleration data higher than 8.67KSPS
I used the following codes to save my acceleration data from my Teensy4.1 board connected to my Macbook comport. I find out that...
etwa 2 Jahre vor | 1 Antwort | 0
1
AntwortFrage
what is wrong with my FFT from a Shaker with accelerometer mounted
I tried to compute the FFT of the data attached to no avail using the FFT code below. The sensor was mounted on a shaker and I a...
mehr als 2 Jahre vor | 1 Antwort | 0
1
AntwortFrage
accelerometer data shows nothing in FFT
I upload the data and the code but when I run it, nothing show up. the accelerometer was connected to a shaker and sampled at ...
mehr als 2 Jahre vor | 3 Antworten | 0
3
AntwortenFrage
i tried pulling my data from arduino port but got error. I am a novice
serialPort = 'COM5'; baudrate = 115200; s = serialport(serialPort,baudrate); pause(4); numsamples = 1000; data = zero...
mehr als 2 Jahre vor | 1 Antwort | 0
1
AntwortFrage
FFT of vibration data in real-time
I have transmited my accelerometer data using wifi and Putty. Can I do the FFT of this data in real-time? If yes, some tips p...
mehr als 3 Jahre vor | 1 Antwort | 0
1
AntwortFrage
How do I plot the FFT of signal from accelerometer
The Sample rate of the accelerometer from the arduino IDE was 833Hz and I placed the accelerometer on a shaker, The shaker has a...
mehr als 3 Jahre vor | 2 Antworten | 0
