Power Factor Correction by using Capacitor Bank Simulation
The pf fall below 0.7 because there's present of inductive load. The important inductive loads responsible for the low power factor are the three-phase induction motors (which operate at a 0.8 lagging power factor), transformer, lamps and welding equipment operate at low lagging power factors.
Thus, the pf needed to be corrected to 0.9 as tnb pf minimum requirement pf is 0.85.
Simulation for power factor correction with the parameters as below:
TCL(total connected load)= 4.42kW
QL=5KVar - inductive load
Qc=2.9KVar - cap bank
Simulated rsesults:
pf before= 0.6628 (below 0.7)
pf after cap bank = 0.9034 ()
Zitieren als
nonabi_il10 (2024). Power Factor Correction by using Capacitor Bank Simulation (https://www.mathworks.com/matlabcentral/fileexchange/77311-power-factor-correction-by-using-capacitor-bank-simulation), MATLAB Central File Exchange. Abgerufen .
Kompatibilität der MATLAB-Version
Plattform-Kompatibilität
Windows macOS LinuxTags
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Live Editor erkunden
Erstellen Sie Skripte mit Code, Ausgabe und formatiertem Text in einem einzigen ausführbaren Dokument.
Version | Veröffentlicht | Versionshinweise | |
---|---|---|---|
1.0.0 |