Dual Motor Control with TI LAUNCHXL-F28069M LaunchPad

Version 1.4.0.0 (221 KB) von Antonin
Field-Oriented Control with TI LAUNCHXL-F28069M, BOOSTXL-DRV8301 inverters and 2 PMS motors
4.6
(13)
5,6K Downloads
Aktualisiert 13. Sep 2023

Lizenz anzeigen

This example shows how to use a closed-loop Field-Oriented Control (FOC) algorithm to regulate the speed and torque of a 2 three-phase Permanent Magnet Synchronous Motors (PMSM). This example uses C28x peripheral blocks and C28x DMC library blocks from the Embedded Coder Support Package for Texas Instruments C2000 Processors.
For newer versions and other hardware setup, check the shipping version of this example on this page: https://www.mathworks.com/help/ti-c2000/ug/dual-motor-dyno-example.html
Required Hardware:
- TI LAUNCHXL-F28069M LaunchPad (http://www.ti.com/tool/LAUNCHXL-F28069M)
- 2 BOOSTXL-DRV8301 with a 3-phase brushless motor and a 12-24V power supply (http://www.ti.com/tool/BOOSTXL-DRV8301)
- 2 PMSM (i.e. 2MTR-DYNO setup http://www.ti.com/tool/2mtr-dyno)
More information on how the models have been created and how to use them in the following video:
http://youtu.be/ncM7N-hLKQM

Zitieren als

Antonin (2024). Dual Motor Control with TI LAUNCHXL-F28069M LaunchPad (https://www.mathworks.com/matlabcentral/fileexchange/49109-dual-motor-control-with-ti-launchxl-f28069m-launchpad), MATLAB Central File Exchange. Abgerufen.

Kompatibilität der MATLAB-Version
Erstellt mit R2014b
Kompatibel mit R2014b und späteren Versionen
Plattform-Kompatibilität
Windows macOS Linux
Communitys
Mehrere Dateien sind in der  Power Electronics Control Community erhältlich

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

c28069pmsmfocdual

Version Veröffentlicht Versionshinweise
1.4.0.0

Updated link to the newer version of the example in the description
1.3.0.0

Fixed a factor of 2 error in the speed calculation
1.2.0.0

converted the PWM diagram to pdf
Updated the description with hardware part numbers and links to vendor pages
Added the video link to the description.
1.1.0.0

Switching to MLL as this example could be used later as a shipping example