How to adjust edge line spacing using fsurf
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi friends
I would like to ask how to adjust the spacing of edge lines in 'fsurf' function. I will attch my code down here. Hope a hero can pop up and save my day:).
%% numerical parameters
e=0.5625;
fc=64.1741;
ft=64.1741/26.29;
m=3*(fc^2-ft^2)/fc/ft*e/(e+1);
%% variable identification
r = @(theta) (4*(1-e^2)*(cos(theta)).^2+(2*e-1)^2)./(2*(1-e^2)*cos(theta)+(2*e-1)*(4*(1-e^2)*(cos(theta)).^2+5*e^2-4*e).^0.5);
I1 = @(tao,theta) (1-1.5*(tao/fc).^2-m*(tao/fc)/sqrt(6)*r(theta))/m*sqrt(3)*fc;
funx = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta+2/3*pi-1/3*pi)+I1(tao,theta)/sqrt(3));
funy = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta-1/3*pi)+I1(tao,theta)/sqrt(3));
funz = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta-2/3*pi-1/3*pi)+I1(tao,theta)/sqrt(3));
h(1)=fsurf(funx,funy,funz,[0 300 -pi/3 pi/3]);
hold on
h(2)=fsurf(funy,funz,funx,[0 300 -pi/3 pi/3]);
hold on
h(3)=fsurf(funz,funx,funy,[0 300 -pi/3 pi/3]);
set(h,'edgecolor','k');
set(h,'facecolor','none');
set(h,'FaceAlpha',0.5);
grid off
0 Kommentare
Akzeptierte Antwort
KSSV
am 9 Aug. 2021
PRoceed like this:
clc; clear all ;
%% numerical parameters
e=0.5625;
fc=64.1741;
ft=64.1741/26.29;
m=3*(fc^2-ft^2)/fc/ft*e/(e+1);
%% variable identification
r = @(theta) (4*(1-e^2)*(cos(theta)).^2+(2*e-1)^2)./(2*(1-e^2)*cos(theta)+(2*e-1)*(4*(1-e^2)*(cos(theta)).^2+5*e^2-4*e).^0.5);
I1 = @(tao,theta) (1-1.5*(tao/fc).^2-m*(tao/fc)/sqrt(6)*r(theta))/m*sqrt(3)*fc;
funx = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta+2/3*pi-1/3*pi)+I1(tao,theta)/sqrt(3));
funy = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta-1/3*pi)+I1(tao,theta)/sqrt(3));
funz = @(tao,theta) -(sqrt(2)/sqrt(3)*tao.*sin(theta-2/3*pi-1/3*pi)+I1(tao,theta)/sqrt(3));
m = 100 ; n = 100 ;
tao = linspace(0,300,m) ;
theta = linspace(-pi/3,+pi/3,n) ;
[tao,theta] = meshgrid(tao,theta) ;
% h(1)=fsurf(funx,funy,funz,[0 300 -pi/3 pi/3]);
% hold on
% h(2)=fsurf(funy,funz,funx,[0 300 -pi/3 pi/3]);
% hold on
% h(3)=fsurf(funz,funx,funy,[0 300 -pi/3 pi/3]);
figure
hold on
h(1)=surf(funx(tao,theta),funy(tao,theta),funz(tao,theta)) ;
h(2)=surf(funy(tao,theta),funz(tao,theta),funx(tao,theta)) ;
h(3)=surf(funz(tao,theta),funx(tao,theta),funy(tao,theta));
set(h,'edgecolor','k');
set(h,'facecolor','none');
set(h,'FaceAlpha',0.5);
grid off
Weitere Antworten (1)
Walter Roberson
am 9 Aug. 2021
You can set the MeshDensity parameter of your h handles. https://www.mathworks.com/help/matlab/ref/matlab.graphics.function.parameterizedfunctionsurface-properties.html#bvfwdd7_sep_shared-MeshDensity
Siehe auch
Kategorien
Mehr zu Fit Postprocessing finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!