Estimating the period and the damping of the system
6 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Hello,
I am new with MatLab. I want to Estimate the period and the damping of the system from a set of data using three values of j cycles:
j = 10 cycles, 20 cycles, 30 cycles
For each case c.I, c.II, and c.III I am supposed to use different starting peak (i.e., moving window of peaks) and calculate the median value of damping ratio and natural period for each case C.I, C.II, and C.III. and also tabulate the results.
Does anyone have a suggestion about how to approad this problem?
I appreciate the help!
I used following code to extract and plot data and I am stuck on how to find period and damping:
code:
clc; clear all; close all
load Vibration_Data.txt
acc = Vibration_Data(:,2);
dt = 0.02;
time = (0:numel(acc)-1) * dt;
plot (time,acc,'b-');
findpeaks(acc,time)
peaks=findpeaks(acc,time)
period=time(peaks)-time(peaks(0:size(peaks)-1))
error:
last line: array indices must be positive integers or logical values.
2 Kommentare
Sameer Pujari
am 19 Jul. 2021
Bearbeitet: Sameer Pujari
am 19 Jul. 2021
As per my understanding, you are trying to calculate period(s) between two peaks.
You could use numel(peaks) or length(peaks) to find number of elements in the peaks array.
Then use for loop to generate an array of period.
for i=1:length(peaks)-1
period(i)=time(i+1)-time(i)
end
In matlab, Array indexing starts from index '1'. index '0' is not valid. So, you might be getting the error
Antworten (1)
Simon Chan
am 19 Jul. 2021
This line will give an error:
period=time(peaks)-time(peaks(0:size(peaks)-1))
So just try the following:
period=time(peaks)-time(peaks-1)
Siehe auch
Kategorien
Mehr zu Spectral Measurements finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!