Do you have to have an FFT to do an IFFT?
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I know that you can do a Fast Fourier Transformation from time to frequency domain and then back to the time domain with an Inverse Fast Fourier Transformation, but is it possible to just have an Inverse Fast Fourier Transformation converting from the frequency to the time domain without initially having the Fast Fourier Transformation?
0 Kommentare
Akzeptierte Antwort
David Sanchez
am 5 Jul. 2013
You do not have to have used fft before using ifft. The following will work:
x=rand(100,1);
b=ifft(x);
The subject of what you get at the end is another issue. To obtain anything coherent, your initial data should be data in frequency domain.
Weitere Antworten (1)
Walter Roberson
am 5 Jul. 2013
Yes. ifft() works on any frequency data, no matter where it came from. Just be careful that the frequency data is not stored in shifted format (with 0 in the center)
For example you can find out how a 50 Hz and 50.1 Hz tone "beat" together by generating an array of zeros that is long enough, setting the bins for 50 Hz and 50.1 Hz to the same value (remember to set for both half-arrays), and then ifft() to see what the result is over time.
Siehe auch
Kategorien
Mehr zu Fourier Analysis and Filtering finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!