![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/568504/image.png)
Add cartesian axes to polarscatter?
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Maximilian Freiberg
am 26 Mär. 2021
Kommentiert: Maximilian Freiberg
am 1 Apr. 2021
Hi,
I would like to know if t's possible to add cartesian axes onto a polar scatter plot like in this picture.
Haven't found any solution for this problem.
Thank you very much!
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/562866/image.png)
0 Kommentare
Akzeptierte Antwort
Pavan Guntha
am 31 Mär. 2021
Hi Maximilian,
You could try the following workaround:
1) You could make use of axes and polaraxes commands and their properties to add to the same figure window as illustrated in the code below:
th = pi/6:pi/6:2*pi;
r1 = rand(12,1);
figure(1);
clf
xl = 'X (mm)';
yl = 'Y (mm)';
axes1 = axes("XLim", [-3 3], "YLim", [-3 3], "Box","on");
axes2 = polaraxes;
axes2.RLimMode = 'manual';
rlim(axes2, [0 0.5]);
hold on
polarscatter(axes2,th,r1,'filled')
r2 = rand(12,1);
polarscatter(axes2,th,r2,'filled')
hold off
axes2.Position = [0.165 0.165 0.7 0.7];
You could vary the Position and Units properties of polaraxes to place the polarplot at appropriate place on the figure. The plot for the above code is as follows:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/568504/image.png)
Hope this helps!
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Polar Plots finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!