How create serial RLC circuit in Simulink?
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi, I have small problem. I do serial RLC circuit in Simulink. I created scheme, have defined constat (capacitor, coil and resistor), but it isn't work. Output waveform isn't correct. Maybe I have wrongly set the source. There are equation, scheme and values:
![](https://www.mathworks.com/matlabcentral/images/broken_image.png)
![](https://www.mathworks.com/matlabcentral/images/broken_image.png)
Values: L = 0.3; C = 4*10^-5; R = 2 Source: Amplitude 20V; Frequency: 50 Hz
How set the source to the correct output? My output is here:
![](https://www.mathworks.com/matlabcentral/images/broken_image.png)
0 Kommentare
Antworten (1)
John Doe
am 9 Mai 2013
Bearbeitet: John Doe
am 9 Mai 2013
It looks as though your intial conditions are 0 for both integrators.
Are you supposed to simulate the system in steady-state? One of your initial values are probably incorrect. Are you given any additional information in your assignment?
(I haven't tried it out, but try setting the intial current to 0.0603). It is almost 90 degrees out of phase with the voltage
current = V/(R+1i*2*pi*f-1i/(2*pi*f*C)); % In steady state (as phasor).
- Rob
0 Kommentare
Siehe auch
Kategorien
Mehr zu Electrical Block Libraries finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!