How to Simulate Nonlinear Model Discrete Time?
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
This is My Nonlinear Model
function [PositionN, VelocityN, TorqueN] = traindiscretemodel(u,Tim_step,Position,Velocity,Torque,Mass,Ca_0,Ca_1,Ca_2,Tao,R,Eta)
% Train Model
PositionN = Position + Velocity*Tim_step;
VelocityN = Velocity + 1/Mass *(Eta*Torque/R - (Ca_0 + Ca_1*Velocity + Ca_2*Velocity^2))*Tim_step;
TorqueN = Torque - 1/Tao*Torque*Tim_step + 1/Tao*u*Tim_step;
end
This is parameters i used
clc;clear;close all;
Eta = 0.96;
% Parameter Massa
Mass = [8095;8500;8457;8500;8443;8396;8491];
Tim_step = 0.01;
R = [0.290736184319659;0.295289596853781;0.256349340814675;0.295668792806951;0.281617962311270;0.254877020249970;0.263924910943352];
Tao = [0.744417105917954;0.771737581122686;0.538096044888052;0.774012756841706;0.689707773867623;0.529262121499823;0.583549465660115];
Torquebound = [-3297.53650110286,3297.53650110286;-3517.25332991404,3517.25332991404;-1805.63954664794,1805.63954664794;-3535.78455981619,3535.78455981619;-2873.13552926226,2873.13552926226;-1748.36142518872,1748.36142518872;-2108.92205347325,2108.92205347325];
% Parameter Resistansi
Ca_0 = [5.2;5.2;5.2;5.2;5.2;5.2;5.2;];
Ca_1 = [0.038;0.038;0.038;0.038;0.038;0.038;0.038;];
Ca_2 = [0.00112;0.00112;0.00112;0.00112;0.00112;0.00112;0.00112;];
v0 = 20;
cd('G:\Ivan\Semester 10\Tugas Akhir II\matlab\Train Model Open Loop');
save parametersvalue.mat
with that discrete time model and parameters i used, I want simulated the model open loop. Can i used ode45?
0 Kommentare
Antworten (0)
Siehe auch
Kategorien
Mehr zu Assembly finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!