Filter löschen
Filter löschen

Getting meshgrid along different angles for data extraction from a matrix/image?

2 Ansichten (letzte 30 Tage)
Hi,
I have three point locations of a matrix which I want to use to get inclined meshgrid about the lines joining these points. I know how to individually perform these but I am unable to figure out how to rotate both of them together using pol2cart function. A similar question where pacman shape is obtained using the same technique. However, in the current implementation, I do not want a pacman shape and the rounded region that we see in the second plot should be at the end of the second line.
How to resolve this?
x0 = 500; y0 = 1;
x1 = 450; y1 = 300;
x2 = 600; y2 = 700;
m = 1000; n=1500;
subplot(2,1,1)
plot([y0,y1,y2],[x0,x1,x2]); axis ij equal; xlim([1,n]);ylim([1,m]);
grid on;
title('This is how the lines should look in the image or matrix')
[yi,xi] = meshgrid(y1-(1:n),x1-(1:m));
ang = atan((y1-y0)/(x1-x0));
ang2 = atan((y2-y1)/(x2-x1));
[the,ro] = cart2pol(yi,xi);
tt = the(:,1:x1);rt = ro(:,1:x1);
[xt1,yt1] = pol2cart(tt+ang,rt);
tt2 = the(:,(x1+1):end);rt2 = ro(:,(x1+1):end);
[xt2,yt2] = pol2cart(tt2+ang2,rt2);
x = [xt1,xt2];
y = [yt1,yt2];
intR = 10; extR = 100;
subplot(2,1,2)
crack2 = x<=intR & x>=-intR & y<=sqrt(intR^2-x.^2);
notcrack= x<=(intR+extR) & x>=-(intR+extR) & y<=sqrt((intR+extR)^2-(x).^2);
region= notcrack & ~crack2;
imshow(region);h = gca; h.Visible = 'on';
title('this is the maximum external region')
  2 Kommentare
Image Analyst
Image Analyst am 22 Jul. 2020
I don't understand. What is an "inclined meshgrid"?
And do you have some mathematical/analytical formula for the mask and you just want to create a mask image(s) for some region(s) like a mask for crack and a mask for non-crack?
Then you say "I do not want a pacman shape". Well, I do not see such a shape in the images you posted, so I'm not sure why you said that.
Is your "maximal external region" image what you want, or not? It has no pacman shape. If it's not what you want, then what do you want?
Then you say "the rounded region that we see in the second plot should be at the end of the second line." Well, I do not see a second plot. Just one plot and a binary image. Do you want the U-shaped region in the left of the image to somehow be on your graph of the two line segments in the plot? I don't understand what that would look like so please show us.
waqas
waqas am 23 Jul. 2020
Bearbeitet: waqas am 23 Jul. 2020
What I actually want to find out is the value of a function similar to:
The values are defined by where you take the crack tip and overall angle of the crack in the image. Value of n varies from -1 to 2. For a straight crack, I can inclined the mesh using pol2cart as was answered in last question I asked (link to open the question). But if the crack is changing directions e.g., in the first figure of current question where the crack tip is now at (600,700), then implementation of pol2cart should change. Thats why I used "inclined meshgrid".
I do not have a formula for mask but the idea is that the mask would consist of some region outside the crack too. Howoever, crack itself will be removed from the mask as the formula I mentioned above is not suppose to be applied on the crack itself.
"Pacman shape reference" was based on last question [link]. I changed the shape as follows:
As you can see that the round region is after the crack tip only.
"Maximum external region" in would be R_ext now and I want to make a mask that would take care of the change of direction of the crack, which is shown in the plot attached with the question.
Hopefully I have explained all the points clearly. Now, I want to select region around two line (in the plot) to be equal to R_ext and then at the end of the crack tip i.e., (600,700), I want to make a rounded shape just like the figure posted above. Eventually I am going to use this mask to get the pixel values of grayscale images that I have and then analyze them.
In my previous question, you mentioned that we can use image processing techniques to get the mask too. Can you share the details?

Melden Sie sich an, um zu kommentieren.

Akzeptierte Antwort

Matt J
Matt J am 22 Jul. 2020
If you're just trying to generate shaded polygons, it would be simpler just to use impoly, e.g.,
x0 = 1; y0=1;
x1 = 200; y1=500;
x2 = 500; y2=100;
m = 800; n=600;
xy=[x0,y0;x1 y1;x2 y2];
xy=[xy;flipud(xy+[0,100])];
H=impoly(ancestor(imshow(false(m,n)),'axes'),xy);
imshow(H.createMask)
  14 Kommentare
Matt J
Matt J am 26 Jul. 2020
I may be missing something, but it seems to me it would just be,
xt1 = xt1 + translation_vector(1);
yt1 = yt1 + translation_vector(2);
waqas
waqas am 26 Jul. 2020
Thank you the discussion was really helpful. I am posting the complete code with all the corrections in case some needs help. I will accept your answer to close the thread too.
This is how the final mask looks like:
There is still a little inconsistancy right where the lines meet but I can live with that.
x0 = 500; y0 = 1;
x1 = 400; y1 = 500;
x2 = 600; y2 = 1000;
m = 1088; n=2060;
subplot(2,1,1)
plot([y0,y1,y2],[x0,x1,x2]); axis ij equal; xlim([1,n]);ylim([1,m]);
grid on;
title('This is how the crack should look in the image or matrix')
[yi,xi] = meshgrid(y2-(1:n),x2-(1:m));
% ang = atan((y1-y0)/(x1-x0));
% ang2 = atan((y2-y1)/(x2-x1));
ang = atan((x1-x0)/(y1-y0));
ang2 = atan((x2-x1)/(y2-y1));
[the,ro] = cart2pol(yi,xi);
tt = the(:,1:y1);rt = ro(:,1:y1);
[yt1,xt11] = pol2cart(tt-ang,rt);
translation = (x0-x2) + ((y2-y0)*tan(ang));
xt1 = xt11 + translation;
tt2 = the(:,(y1+1):end);rt2 = ro(:,(y1+1):end);
[yt2,xt2] = pol2cart(tt2-ang2,rt2);
x = [xt1,xt2];
y = [yt1,yt2];
intR = 10; extR = 200;
subplot(2,1,2)
crack2 = x<=intR & x>=-intR & y>=-sqrt(intR^2-x.^2);
notcrack= x<=(intR+extR) & x>=-(intR+extR) ;
notcrack2 = y>=-sqrt((intR+extR)^2-(x).^2);
region= notcrack & ~crack2 & notcrack2;
imshow(region);h = gca; h.Visible = 'on';
title('Mask')

Melden Sie sich an, um zu kommentieren.

Weitere Antworten (0)

Kategorien

Mehr zu 2-D and 3-D Plots finden Sie in Help Center und File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by