- Accelerometer-gyroscope (I2C Address can be 0x68 or 0x69,depending on the logical level on AD0 pin)
- Magnetometer - This is AK8963 sensor (I2C Address - 0x0C)
Incorrect I2C device connected. Expected I2C addresses: [0x0C]. Detected I2C addresses: [0x69].
12 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
i am trying to connect a single mpu 9250 to arduino uno using matlab
as i run the command
imu=mpu9250(a) to create imu object it gave me an error
Incorrect I2C device connected. Expected I2C addresses: [0x0C]. Detected I2C addresses: [0x69].
why matlab is expecting device address as 0x0C is there any possible way to change it ?
0 Kommentare
Antworten (1)
Gayatri Menon
am 7 Mai 2020
Bearbeitet: Gayatri Menon
am 7 Mai 2020
Hey
Is the AD0 pin of the sensor connected to high?
Can you try creating the object by specifying the I2C addresses
imu = mpu9250(a,'I2CAddress',{'0x69','0x0C'})
MPU9250 has two I2C dies
Datasheet : MPU9250
Hope this helps
Thanks
Gayatri
0 Kommentare
Siehe auch
Kategorien
Mehr zu Arduino Hardware finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!