Patch antenna with multiple feeds with independent voltage and phases
5 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I'm using the antenna toolbox and would like to create a custom antenna element which consists of two patches above a ground plane. I have no problem in creating the geometry and the final element using pcbStack (this tutorial helped). However, even though I can specify multiple feeds using pcbStack's FeedLocation property, I can only specify one value each for the voltage and phase (using FeedVoltage and FeedPhase, respectively). Is it possible to specify independent voltage and phases?
Thanks!
0 Kommentare
Akzeptierte Antwort
Da Huang
am 24 Sep. 2019
Hi udax,
if you setup the FeedLocations property properly in pcbStack object. Then you shall be able to set the FeedVoltage and FeedPhase as vector in the same object. Please see example below for a two feed patchMicrostripEnotch, which has independent feed voltage and phase.
p = patchMicrostripEnotch;
p = pcbStack(p);
p.FeedLocations = [-0.0034 0 1 3;0.0034 0 1 3];
p.FeedVoltage = [1,2];
p.FeedPhase = [0,90];
p.pattern(1e9);
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Get Started with Antenna Toolbox finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!