How to print variable into different rows?

f          = COF_S / C_ratio;        % Coefficient of friction, f
e          = Eccen_Rat_S ;           % Eccentricity Ratio, e
Q          = FV_S * r * c * N * L;   % Lubricant Flow Rate, Q (m^3/s)
Qs         = FR_S * Q ;              % Lubricant Side Flow Rate, Qs (m^3/s)
Tmax       = Temp_in + delta_T  ;    % Maximum Temperature, Tmax (°C)
ho         = (MFT_S)*c;              % Minimum Film Thickness,ho (m)
Phi        = Pos_MFT_S ;             % Position of minimum film thickness (deg)
Term_pos   = TPF_S  ;                % Terminating position of film (deg)
Max_FP     = P/(MFP_S);              % Maximum Film Pressure, Pmax (Pascal,Pa)
pos_max_FP = PFMP_S ;                % Position of maximum film pressure (deg)
T          = f*W*r ;                 % Friction Torque, T (N.m)
Hp         = (T*(N*60))/9550;        % Frictional Horsepower, (hp)ƒ in(hp)

I was wondering on how to display/ print these variables into rows . I mean once I have run the script, I want to display all these variables with its respective values.

[Adam]

doc sprintf

with a \n after each one would do the job.

Answer 1

[Adam Danz]

If you just want to display the variables in the command window, merely list the variables without a terminal semicolon which would normally suppress the display.

f          = COF_S / C_ratio;        % Coefficient of friction, f
e          = Eccen_Rat_S ;           % Eccentricity Ratio, e
Q          = FV_S * r * c * N * L;   % Lubricant Flow Rate, Q (m^3/s)
Qs         = FR_S * Q ;              % Lubricant Side Flow Rate, Qs (m^3/s)
Tmax       = Temp_in + delta_T  ;    % Maximum Temperature, Tmax (°C)
ho         = (MFT_S)*c;              % Minimum Film Thickness,ho (m)
Phi        = Pos_MFT_S ;             % Position of minimum film thickness (deg)
Term_pos   = TPF_S  ;                % Terminating position of film (deg)
Max_FP     = P/(MFP_S);              % Maximum Film Pressure, Pmax (Pascal,Pa)
pos_max_FP = PFMP_S ;                % Position of maximum film pressure (deg)
T          = f*W*r ;                 % Friction Torque, T (N.m)
Hp         = (T*(N*60))/9550;        % Frictional Horsepower, (hp)ƒ in(hp)

% LATER IN YOUR CODE
% Without the semicolon at the end (;), these variable names and their values
% will all display in the command window.  
f 
e  
Q      
Qs   
Tmax     
ho     
Phi  
Term_pos  
Max_FP   
pos_max_FP
T         
Hp     

Another alternative is to collect the variables into cell array for a more compact display

c = {'f', f;
     'e', e;
     'Q', Q}; 
 
 disp(c) % display c in command window