How do I use the OBD tool and what does it do exactly?
14 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Joseph Mazzella
am 4 Okt. 2018
Beantwortet: Mark
am 3 Mär. 2024
Hi I am new to MATLAB and I was wondering what is needed to properly run the OBDtool and what display the program gives. I am looking to pull automotive sensor data and properly display it. Thank you
0 Kommentare
Akzeptierte Antwort
Jegan Mani
am 9 Okt. 2018
Hi Joseph,
The OBD Tool is a MATLAB app that will enable you to log OBD data in MATALB. The tool uses ELM327's serial communication commands to fetech data OBD data using ELM327. The app was developed using a USB based ELM327 - OBD adaptor.
As long as the sensor data is made avialble over OBD bus, the tool should be able to display and if required log the data in MATLAB.
Hope this helps.
Jegan
0 Kommentare
Weitere Antworten (1)
Mark
am 3 Mär. 2024
After working with OBDTool, great job by the way @Jegan Mani, we wanteda bit more from the core scan tool and especially data analysis. After fussing with many OBD2 tools and associated softwre, most based on ELM327 adapters, we found the OCTech Windows software, OBDWiz and TouchScan, has options to output CSV file format. We had been using the Simulink Data Inspector (SDI) to parse CSV data from OBDWiz and can load a dozen different time series data from ECUs, then compare them a few at a time. The ability to zoom in and out, to highlight segments, and identify features for further investigation sets SDI apart from other graphical data replay tools. A sample is attached.
0 Kommentare
Siehe auch
Kategorien
Mehr zu Migrate GUIDE Apps finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!