How do I read and split an audio file into four different frequency ranges?
6 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
sangeet sagar
am 14 Sep. 2018
Kommentiert: Star Strider
am 17 Sep. 2018
I have an audio file of sampling frequency as 16 kHz. Now I would like to read it and split its samples into four range. Namely:
0 kHz - 1 kHz
1 kHz - 2 kHz
2 kHz - 4 kHz
4 kHz - 8 kHz
I have come about the following code but I am not sure if it is correct? I wanted to know if there is any other way.
[signal,fs]=audioread('003.wav');
SigFD = (signal);
n = length(signal); % number of samples
deltaF = fs/n; % frequency resolution
F = [0:floor(n/2)-1, -(floor(n/2)):-1]*deltaF; % frequency vector
lowF = 0; % lowF and highF defines one of the range
highF = 1000;
part1Range = abs(F)>lowF&abs(F)<highF;
Fpart1 = F(part1Range);
Sig1FD = SigFD(part1Range);
0 Kommentare
Akzeptierte Antwort
Star Strider
am 14 Sep. 2018
7 Kommentare
Star Strider
am 17 Sep. 2018
As always, my pleasure.
The first filter is a simple lowpass filter with a passband a 1 kHz. You can use this prototype code to design it.
This designs the second filter:
Fs = 1.6E+4; % Sampling Frequency (Hz)
Fn = Fs/2; % Nyquist Frequency (Hz)
Fnotch = 1.5E3; % Notch Frequency (Hz)
BW = 1E+3; % Passband Width (Hz)
Ws = [Fnotch-BW/2-1 Fnotch+BW/2+1]/Fn; % Passband Frequency Vector (Normalised)
Wp = [Fnotch-BW/2-5 Fnotch+BW/2+5]/Fn; % Stopband Frequency Vector (Normalised)
Rp = 1; % Passband Ripple (dB)
Rs = 150; % Stopband Attenuation (dB)
[n,Wp] = ellipord(Wp,Ws,Rp,Rs); % Default Here Is A Bandpass Filter
[z,p,k] = ellip(n,Rp,Rs,Wp);
[sos,g] = zp2sos(z,p,k); % Use Second-Order-Section Implementation For Stability
% s_filtered = filtfilt(sos,g,s); % Filter Signal (Here: ‘s’)
figure
freqz(sos, 2^14, Fs) % Bode Plot Of Filter
set(subplot(2,1,1), 'XLim',[0 Fn]) % Optional, Change Limits As Necessary For Best Resolution
set(subplot(2,1,2), 'XLim',[0 Fn]) % Optional, Change Limits As Necessary For Best Resolution
The others are the same except for the centre frequencies and the bandwidths.
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Digital Filter Design finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!