Can someone please help me?

I have this error: >> p5_7_Simulate_the_Error_Prob_of_OOK_NRZ_in_a_Multipath_Channel Undefined function or variable 'i_peak'.

Error in p5_7_Simulate_the_Error_Prob_of_OOK_NRZ_in_a_Multipath_Channel (line 25) pt = ones(1,nsamp).*i_peak;

What should I do? This is the code:

%%*****Channel Impulse response (using ceiling bounce model*************
  Rb=200e6;
  % Bit rate
  Tb=1/Rb;
  % bit duration
  sig_length = 1e3;
  % number of bits
  nsamp = 10;
  % samples per symbols
  Tsamp = Tb/nsamp;
  % sampling time
  Dt=0.1;
  % Normalized delay spread
  Drms=Dt*Tb;
  %RMS delay spread
  a=12*sqrt(11/13)*Drms;
  K=30*nsamp;
  % number of channel taps
  k=0:K;
  h=((6*a^6)./(((k*Tsamp) + a).^7));
  % channel impulse response
  h=h./sum(h);
  % normalizing for conservation of energy
  %%system impulse response
  pt = ones(1,nsamp).*i_peak;
  % transmitter filter
  rt=pt;
  % receiver filter matched to pt
  c=conv(pt,h);
  c=conv(c,rt);
  % overall impulse response of system
  delay=find(c==max(c));
  % channel delay
  %%multipath simulation
  if length(sig_length)==1
      if sig_length>0
          Range=[0, sig_length-1];
      else Range=[sig_length+1, 0];
      end
  else Range =[min(sig_length), max(sig_length)];
  end
  OOK=randi(Range,1,sig_length);
  % random signal generation
  Tx_signal=rectpulse(OOK,nsamp).*i_peak;
  % Pulse shaping function (rectangular pulse)
  channel_output=conv(Tx_signal,h);
  % channel output, without noise
  Rx_signal=channel_output+sgma*randn(1,length(channel_output));
  % received signal with noise
  %Rx_signal=awgn(channel_output,EbN0+3-10*log10(nsamp), 'measured');
  %%Matched filter simulation
  MF_out=conv(Rx_signal,rt)*Tsamp;
  % matched filter output
  MF_out_downsamp=MF_out(delay:nsamp:end);
  % sampling at end of bit period
  MF_out_downsamp=MF_out_downsamp(1:sig_length);
  % truncation
  Rx_th=zeros(1,sig_length);
  Rx_th(MF_out_downsamp > Ep/2) = 1;

[jonas]

What is i_peak? It's obviously undefined, as clearly stated by the error message.

[Alexandra Diaconu]

Thank you. I solved it.

[Yinglin Chen]

So what is i_peak? I am trying to wirte a similar function.

Answer 1

[KALYAN ACHARJYA]

Check here my previous answer