Speedgoat terminal board pin number relation to channel vector?
9 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I'm using a the speedgoat performance, trying to utilize the Kintex7 FPGA IO333-6 ADC's and DAC's. I'm using the speedgoat provided bitstream 'speedgoat_IO333_06_all_io.mat'. I'm unclear on how to relate the pins of the terminal board, https://www.speedgoat.com/help/page/io_main/refentry_io33x_6_pin_mapping , to the channel vector which is requird for the simulink blocks A/D read, https://www.speedgoat.com/help/page/io_main/refentry_analog_io33x_06_input_v1 .
0 Kommentare
Antworten (1)
Diego Kuratli
am 9 Aug. 2018
Typically, the speedgoat_IO333_06_all_io FPGA bitstream is for system testing purposes only. You might have a Custom Implementation.
The documentation includes the base pin mapping: https://www.speedgoat.com/help/page/io_main/refentry_io33x_6_pin_mapping
The digital channels (TTL) are listed as "FPGA Code Module functionality" because those channels would be configured with specific Code Modules in a Custom Implementation. In the case of the speedgoat_IO333_06_all_io FPGA bitstrea, pin 2-9, 36-38, and 41-41 correspond to digital I/O channel 1 to 13.
The analog I/O part cannot be configured with a Custom Implementation, so it is fixed.
For the analog inputs, in the A/D read block you can enable channels 1 to 16, by entering a vector. E.g. if you want to use analog input channels 1, 2, 3, 4 -> Channel vector: [1, 2, 3, 4]. Same applies for the analog output channels and the D/A write block.
To minimize the I/O latency, I recommend enabling only the channels that you effectively need. Also, by preference use consecutive channels.
0 Kommentare
Siehe auch
Kategorien
Mehr zu Multicore Processor Targets finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!