How to choose the right image filtering technique for my application
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I am observing two droplets, one with a air bubble and one without an air bubble. The droplets are frozen and I watch the freezing process and track through time. Currently I send my black and white video (a snippet of it is attached as image.png) through an edge-detection filter in Matlab this filter is as follows:
B = edge(Frames,'canny',0.1);
The only problem with this "canny" method of filtering is that they leave too much noise inside the droplets, especially in the one with an air bubble. When I analyze with these filters, the noise interferes with my analysis of the freezing line and skews my data. As you can see in the "withotu bubble.PNG" file there is some noise around the freezing line and this noise is much worse in the "withairbubble.PNG" file that is attached. I want to know if there is a way for me to either remove or avoid all that noise surrounding the lines and only filter in the freezing line as it goes up.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/171380/image.png)
0 Kommentare
Antworten (1)
Image Analyst
am 19 Mär. 2018
Then don't use edge detection. I see no reason why you'd want to use edge detection. And why can't you just throw out any droplets that have a bubble in them? Why even bother with them? Can't you just take another video, or not start recording if you see a bubble? Just record enough videos so that you have enough good videos even when you throw out the bad ones with air bubbles.
11 Kommentare
Image Analyst
am 26 Mär. 2018
Your video just has one droplet in each frame, right? Not two like you had above. I assume you just stitched two different frames side-by-side.
Siehe auch
Kategorien
Mehr zu Nonlinear Operators finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!