HC-SR04 library listArduinoLibraries is not showing it.
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
HI i have copied HC-SR04 library to default folder i.e arduino\libraries\ yet listArduinoLibraries is not showing it. please advise actions
2 Kommentare
Antworten (3)
Madhu Govindarajan
am 26 Okt. 2017
Bearbeitet: Walter Roberson
am 9 Feb. 2019
Have you tried using this? - https://www.mathworks.com/matlabcentral/fileexchange/57898-hc-sr04-add-on-library-for-arduino
Please follow all the instructions provided in that order -
Important: Before using this add-on library in MATLAB, you need to install the Ultrasonic Arduino library. Here are the instructions: 1. Download the zip file from https://github.com/JRodrigoTech/Ultrasonic-HC-SR04/archive/master.zip 2. Unpackage the zip into local directory and rename the folder to ‘Ultrasonic’. 3. Move the ‘Ultrasonic’ folder into the "libraries" folder inside your Arduino sketchbook folder: On Windows, the default path is "Documents\Arduino\libraries\" On Mac, the default path is "~/Documents/Arduino/libraries/" On Linux, the default path is "/home/<username>/Arduino/libraries"
3 Kommentare
vladimir so
am 24 Feb. 2018
query
They could explain where exactly this file should be copied.
I have copied everywhere but when writing: listArduinoLibraries in matlab I only get it: 'Adafruit / MotorShieldV2' 'I2C' 'SPI' 'Servo'
1 Kommentar
Madhu Govindarajan
am 26 Feb. 2018
Have you tried the commands provided in this answer ? If not, please try it with your library name - I would guess some version that involves 'JRodrigoTech/HCSR04' should fix the issue.
Thulasiram Reddy
am 9 Feb. 2019
iam using matlab 2016a version and i installed arduino matlab support packages
Description:
i want to interface ultrasonicsensor with matlab but the addon is not showing in matlab after that i seted path i given command "listArduinoLibraries" it showing
'Adafruit/MotorShieldV2'
'I2C'
'JRodrigoTech/HCSR04'
'SPI'
'Servo
afer that i again given command a = arduino('COM6', 'Uno', 'Libraries', 'JRodrigoTech/HCSR04')
Updating server code on board Uno (COM6). Please wait.
Cannot program board Uno (COM6). Please make sure the board is supported and the port and board type are correct.
?????????????whycoming like this...
1 Kommentar
Madhu Govindarajan
am 11 Feb. 2019
Have you tried putting the board into bootloader mode by double pressing the Reset button?
Siehe auch
Kategorien
Mehr zu MATLAB Support Package for Arduino Hardware finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!