USRP N210 connection_FPGA compatibility number

 Hi, 

I'm working on connecting the USRP N210 to my laptop.

I installed the Support package from mathworks.com (https://www.mathworks.com/hardware-support/usrp.html)

When I run the getSDRuDriverVersion function in Matlab 2016a, I get an answer

Ans = 003.009.001-vendor

When I run the function:

radios = findsdru, I get an answer

 Checking radio connections ... Win32; Microsoft Visual C ++ Version 12.0; Boost_105600; UHD_003.009.001-vendor

---------- see libbuhd version information above this line ----------

UHD Error:

 Device discovery error: input stream error Warning: The firmware build for the USRP radio at '192.168.10.2' is not compatible with the host code build. Update the USRP Radio firmware to version '003.009.001-vendor'. Refer to Troubleshooting section of Getting Started document for instructions. In coder.internal.warning (line 8)   In reportSDRuStatus (line 41)   In findsdru (line 177)

Radios =

   Platform: 'N200 / N210 / USRP2'     IPAddress: '192.168.10.2'     SerialNum: 'E4R22N6UP'     Status: 'Not compatible'

Function,

I = probesdru ('E4R22N6UP') 

I = Win32; Microsoft Visual C ++ Version 12.0; Boost_105600; UHD_003.009.001-vendor

UHD Error:  Device discovery error: input stream error - Opening a USRP2 / N-Series device ... Error: RuntimeError: Please update the firmware and FPGA images for your device. See the application notes for USRP2 / N-Series for instructions. Expected FPGA compatibility number 11 but got 9: The FPGA build is not compatible with the host code build. As an Administrator, please run:

"B: \ 3p \ install \ 1558174 \ Win64 \ UHD \ lib \ uhd \ utils \ uhd_images_downloader.py"   "B: \ 3p \ install \ 1558174 \ win64 \ uHD \ bin \ uhd_image_loader" ^      --args = "type = usrp2, addr = 192.168.10.2"

My questions are:

1. Where I run :

"B: \ 3p \ install \ 1558174 \ Win64 \ UHD \ lib \ uhd \ utils \ uhd_images_downloader.py"

  "B: \ 3p \ install \ 1558174 \ win64 \ uHD \ bin \ uhd_image_loader" ^      --args = "type = usrp2, addr = 192.168.10.2"

2. On: http://files.ettus.com/binaries/images/

I can not find FPGA compatibility number 11. 

Please can anybady help me..

With regards, 

Ivana R.