I should emphasize more: I am able to get the values that I need when I turn off the loop in the above code and just set k to the values for which I am having problems. It is only when I am looping through values of k that NaN pops up in the vectors avg_forces, avg_motor_torques, and avg_actual_torques.
Why is my script returning NaN for values of an array ONLY when used in a for loop?
25 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
rkepp12
am 30 Jun. 2016
Kommentiert: rkepp12
am 1 Jul. 2016
The problem I am having is that I'm trying to process some data and make some graphs out of it, but some of the arrays that I create will return NaN at specific indices, even though I know that there should not be a problem. I know this because I do the calculation outside of the loop (commenting out the loop, and setting the loop variable to the specific value with which I'm having the issue, then running the script again), and I get the expected result. Does it have something to do with the loop? I'm almost certain that it isn't the data, based on the fact that I can do the calculation outside of the loop and have no problems.
filenames = {'shoulder_cal_1', 'shoulder_cal_2', 'shoulder_cal_3', 'shoulder_cal_4', 'shoulder_cal_5', 'shoulder_cal_6'};
% filenames = {'elbow_cal_1', 'elbow_cal_2', 'elbow_cal_3', 'elbow_cal_4', 'elbow_cal_5', 'elbow_cal_6'};
motor_volts = 6; % Set to 6 for shoulder, set to 7 for elbow
motor_torque = 10; % Set to 10 for shoulder, set to 11 for elbow
world_force_x = 8;
world_force_y = 9;
x_offset = 0.0; % from computer, to convert to coordinates with
y_offset = -0.65; % origin at the motor (in meters)
count = 0;
% for j = 1; % For debugging
for j = (1:length(filenames)); % Option that's actually used
count = count + 1;
disp(count);
file = strcat('File name that I know works');
data = dlmread(file);
data_length = size(data,1);
voltages = ones(1,51);
avg_forces = ones(1,51);
avg_actual_torques = ones(1,51);
avg_motor_torques = ones(1,51);
index = 0;
% for k = 0.300; % For debugging NaN
for k = (0.0000:0.1000:5.0000); % All of the possible voltage values (from volts_torque2 program)
index = index + 1;
force_mag_vals = [];
actual_torque_vals = [];
motor_torque_vals = [];
for i = (1:data_length);
if data(i, motor_volts) == k;
x_pos = (data(i, 2)/1000.0) + x_offset; % /1000 to convert mm to m
y_pos = (data(i, 3)/1000.0) + y_offset;
force_mag = sqrt(data(i, world_force_x)^2 + data(i, world_force_y)^2);
force_mag_vals = [force_mag_vals force_mag];
motor_torque_vals = [motor_torque_vals data(i, motor_torque)];
torque_calc = data(i, world_force_y)*x_pos - data(i, world_force_x)*y_pos;
actual_torque_vals = [actual_torque_vals torque_calc];
end
end
% Calculates the average of the desired quantity at a specific voltage level
avg_forces(index) = mean(force_mag_vals);
avg_motor_torques(index) = mean(motor_torque_vals);
avg_actual_torques(index) = mean(actual_torque_vals);
voltages(index) = k;
end
% % Creation of various graphs that I know work
end
I believe that when the script returns NaN in avg_forces, it is because it performs mean(force_mag_vals) but force_mag_vals is empty for some reason. Perhaps there is another reason. Can anyone see anything obvious as to why my script is doing this?
2 Kommentare
Akzeptierte Antwort
Walter Roberson
am 30 Jun. 2016
You are testing for floating point equality instead of testing for a value "close enough". Different methods of calculating floating point values can end up with slightly different bottom bits. For example, linspace() uses a different algorithm than : does, in order to adjust for accumulated round-off error.
Because of accumulated round-off error,
k = 0.0000:0.1000:5.0000
is not the same as
k = (0:1:50) / 10;
differing at
0.3, 0.6, 0.7, 1.2, 1.4, 1.7, 1.9, 2.3, 2.4, 2.6, 2.7, 3.1, 3.6
You should be testing for equality to within a tolerance. You might want to use ismembertol()
2 Kommentare
Weitere Antworten (1)
Samuel Vergara
am 30 Jun. 2016
Hi. I think you have a problem reading some files information. Make sure that "data" variable is a numeric matrix. You can run your program until this:
data = dlmread(file);
And then check the values in the workspace. Regards,
Siehe auch
Kategorien
Mehr zu Graphics Object Programming finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!