Full vehicle model help
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I'm trying to model a full vehicle with 8 dof:
- surge
- sway
- yaw
- roll
- rotation of wheels
I'm using a SAE coordinate system:
- x forward
- y to the right of the driver
- z down
I use Pacejka's formula for the calculation of longitudinal and lateral forces. These are the basics equations:
As regards notation
- AS is front left
- AD is front right
- PS is rear left
- PD is rear right
Can anyone help me to find out if I made modeling errors and to tune the model?
It seems to me the main problem is longitudinal slip. I do not understand which convention should I use. Inside Pacejka's book I found this:
I also found different formulas for driving condition where at denominator there is r*omega.
I find strange behaviours in the model, for example if I try to plot longitudinal rear force vs longitudinal slip. If I make a simulation without steering I get non zero values for roll angle, yaw rate, lateral velocity.
Now I'm using a step size of 0.001. Before I was using 0.01 and the graphics look like they came from experimental data.
0 Kommentare
Antworten (1)
Siehe auch
Kategorien
Mehr zu Statics and Dynamics finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!