Don't have Host SCI blocks(Setup/ Receive/ Transmit) in Simulink Library although intall Embedded Coder

Hi, I work on a C2000 Processor with Matlab Simulink and CCS. It's the LaunchPadXL with a C28069 chip on it. At the moment, I can read live data using the simulink file from the mathworks example:

http://www.mathworks.com/matlabcentral/fileexchange/45124-motor-control-with-ti-launchpad

In this example they used the blocks Host SCI Setup and Host SCI Receive (file Host_rx.slx). I can copy it and it works in my programm. But now i want to send data to the target and i don't find those blocks in my Simulink library. I reinstalled Embedded Coder and it still not appears. I saw in Add-On explorer that they should have been there (Embedded Coder®/ Embedded Targets/ Host Communication) but they are not.

I would be very thankful if you could help me.

Thank you

Eric

[Brian McKay]

Did you try to install the Embedded Coder Support Package for Texas Instruments C2000 Processors. It contains a bunch of blocks and functionality for TI C2000 MCU's

To get that, go to Add-ons -> Get Hardware Support Packages

You can see the installation documentation (login required) here: http://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/install-support-for-c2000-processors.html

Good luck,

-Brian

Answer 1

[Mohammed Dangor]

Similar problem, the HOST SCI Block set is unavailable.

Answer 2

[Luis Sarmiento]

Data through SCI can be send using the Instrument Control Toolbox. There you cand find a Serial Send and a Serial Configuration block.

Answer 3

[Alexander Nowak]

Try reinstalling the "Instrument Control Toolbox". This worked for me.

-Alex