synchronised double webcam acquisition
2 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
mattia
am 11 Mär. 2016
Bearbeitet: Florian Enner
am 14 Mai 2016
I have to acquire image sequences from two webcams at the same time.
Synch is very important since I am dealing with stereo vision applied to a moving target.
By using preview I can see two synchronized video streaming. I have checked the synch by filming a chronometer.
When I use ‘start’ and ‘getdata’ to retrieve the two videos I experience about two seconds delay between the two sequences as if they have been acquired one after the other.
How can I manage to have two synchronized video?
Code attached.
Thank you in advance!
camera=setup_webcam
Rcam=camera(1);
Lcam=camera(2);
Rcam.FramesPerTrigger = 30;
Lcam.FramesPerTrigger = 30;
preview(camera)
start(camera)
stoppreview(camera);
diskLoggerR = VideoWriter('Rvvvvvv, 'Uncompressed AVI');
open(diskLoggerR);
dataR = getdata(camera(1), camera(1).FramesAvailable);
numFrames = size(dataR, 4);
for ii = 1:numFrames
writeVideo(diskLoggerR, dataR(:,:,:,ii));
end
close(diskLoggerR);
diskLoggerL = VideoWriter(‘Lvvvv’, 'Uncompressed AVI');
open(diskLoggerL);
dataL = getdata(camera(2), camera(2).FramesAvailable);
numFrames = size(dataL, 4);
for ii = 1:numFrames
writeVideo(diskLoggerL, dataL(:,:,:,ii));
end
close(diskLoggerL);
0 Kommentare
Akzeptierte Antwort
Walter Roberson
am 12 Mär. 2016
I suspect that you will not be able to do this with webcam . If you were using cameras which supported hardware trigger, then you could wire up a trigger and trigger them at the same time, and read in the data. As it is now, you are using software trigger and there is no promise made that software triggers will even attempt to synchronize multiple cameras even when given as a vector to start(). Cameras that support external trigger are not necessarily much more expensive than webcam but they are seldom marketed as "webcam".
0 Kommentare
Weitere Antworten (1)
Florian Enner
am 14 Mai 2016
Bearbeitet: Florian Enner
am 14 Mai 2016
I've uploaded a submission that supports streaming from webcams and ip cameras with very low overhead. We've used it for stereo vision before on relatively slow targets. You should be able to synchronize to within 1 frame, but depending on the speed of your target that may not be enough. It's probably worth a try.
% Connect to cameras
cam1 = HebiCam('<address1>');
cam2 = HebiCam('<address2>');
% Main Loop
while true
img1 = getsnapshot(cam1);
img2 = getsnapshot(cam2);
% ... do vision stuff ...
end
Let me know if that works for you.
0 Kommentare
Siehe auch
Kategorien
Mehr zu Image Acquisition Support Packages for Hardware Adaptors (Generic Video Interface) finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!