Displaying image in Simulink using pixel stream
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Naz
am 7 Dez. 2015
Bearbeitet: Naz
am 9 Dez. 2015
I am trying to display stream of pixels in Simulink. To start with, I create a 2D array, where the first column contains integers 0 1 2 ... and the other column contains pixel data. I use this approach to mimic the stream of pixels as would be supplied by an image sensor:
data = zeros(576*1024*300,2);
n=1;
for frame = 1:300
for row = 1:576
for col = 1:1024
data(n,2) = GRAY(row,col,frame);
data(n,1) = n-1;
n = n+1;
end
end
end
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/152518/image.png)
The buffer collects enough pixel data for a single frame which is then converted back to a 2D matrix and displayed. The simulation refreshes frames very slow - probably every two seconds, i.e. 0.5fps. It seems like the D1 rate is very slow and the pixel data takes a long time to fill the buffer. Thus, currently, to view 300 frames takes about 10 minutes. But the data is ready prior to simulation - why does it take this so long?
I tried to change the 'time' values in the first column to smaller values, but this does not help. There are, probably, some simulation settings that should be adjusted. Any ideas, suggestions? The simulation does not involve any complicated functions, so the refresh rate is definitely not limited by the computer resources.
0 Kommentare
Akzeptierte Antwort
Bharath Venkataraman
am 8 Dez. 2015
Using the video viewer block instead of the matrix viewer will enable you to display the image. You likely need to set a sample time for the From Workspace block.
1 Kommentar
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Computer Vision with Simulink finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!