How to configure DSTATCOM with multi machine-9 bus system to compensate reactive power to the load?

13 Ansichten (letzte 30 Tage)
I have modeled multi machine-9 bus system and tried to configure DSTATCOM with it, but couldn't able to compensate the demand of reactive power of the load of (10 MW + 40 MVAR). Actually, The quadrature and reference quadrature current are coming out of phase to eachother. The DC voltage is increasingly continuously. The system bus voltage is 230 kV, DC capacitor is chose to be 10000 micro farad and DC reference voltage is taken to be 2500 V. Sample time taken for 5 micro seconds. Please suggest me , is there anything I have to change with tuning of PI controller of regulators gains. I have used per unit system , with base of 100 MVA and 230 kV.
  1 Kommentar
Loc Nguyen
Loc Nguyen am 22 Nov. 2024 um 14:28
Verschoben: Walter Roberson am 22 Nov. 2024 um 22:25
I want to connect D-Statcom to IEEE 9 system bus grid.to evaluate Sag voltage with D-statcom and without D-Statcom

Melden Sie sich an, um zu kommentieren.

Antworten (1)

Joel Van Sickel
Joel Van Sickel am 4 Jun. 2024
Unfortunately, you do not provide enough information to provide any guidance. Did you start with a 9 bus system. You should try to get something similar working in a smaller system first. If you have issues with that simpler system, you can share your model and ask more specific questions. There is no way to know what you need based on the information that you have provided.

Kategorien

Mehr zu Power and Energy Systems finden Sie in Help Center und File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by