How to implement the lu function for fixed-point data types?
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Life is Wonderful
am 4 Mär. 2024
Kommentiert: Life is Wonderful
am 5 Mär. 2024
Hi there,
I'd like to implement fixed point functionality for lu. Unfortunately, I don't see any support in Matlab because I'd have to convert the fixed-point data to floating-point before using the lu function.
However, converting the data back to floating-point for the computation would defeat the goal of using fixed-point data types.
Here's my implementation; any help would be greatly appreciated if I could convert to fixed point.
Below is my code
% test bench
n = 5;
num_tests = 100;
testInvertMatrix(n, num_tests);
function max_error = testInvertMatrix(n, num_tests)
% Initialize the maximum error
max_error = 0;
% Run the test cases
for i = 1:num_tests
% Generate a random matrix
A = rand(n);
% Compute the inverse of A using both fixed-point and floating-point
[A_inv_fixed, A_inv_float] = invertMatrix(A);
% I am observing following error
% Error using lu
% Invalid data type. First argument must be double or single.
% Compute the error
error = norm(double(A_inv_fixed) - A_inv_float, 'fro');
% Update the maximum error
max_error = max(max_error, error);
end
% Display the maximum error
fprintf('The maximum error over %d test cases is %e\n', num_tests, max_error);
end
function [A_inv_fixed, A_inv_float] = invertMatrix(A)
% Convert the matrix to fixed-point
A_fixed = fi(A, 1, 16, 15); % 1 sign bit, 16 total bits, 15 fraction bits
% Compute the LU decomposition of A for both fixed-point and floating-point
[L_fixed, U_fixed, P_fixed] = lu(A_fixed);
[L_float, U_float, P_float] = lu(A);
% Compute the inverse of A using the custom algorithm for both fixed-point and floating-point
A_inv_fixed = mldivide(U_fixed, mldivide(L_fixed, mldivide(P_fixed, eye(size(A_fixed)))));
A_inv_float = mldivide(U_float, mldivide(L_float, mldivide(P_float, eye(size(A)))));
end
2 Kommentare
John D'Errico
am 4 Mär. 2024
Yes. I know you WANT to do this. BUT my gut just screams at how bad of an idea this is.
I am sure you can find pseudo-code for an LU online. You can even find a pretty simple LU scheme in MATLAB, that you could then hack to use fixed point data types.
The probem is, subtractive cancellation and division will kill you in fixed point, especially when you are looking at very small numbers of bits. 15 bits, plus a sign bit for 16 total bits?
Akzeptierte Antwort
Andy Bartlett
am 4 Mär. 2024
Bearbeitet: Andy Bartlett
am 4 Mär. 2024
Hi,
Fixed-Point Designer provides several tools for solving systems of linear equations, including QR decomposition and solving AX=B, in both MATLAB and Simulink.
The tools for use in Simulink are found here. The tools for Simulink also handle Singular Value Decompositon (SVD).
Most of these tools are optimized for hardware efficient implementations on FPGAs and ASICS. HDL code generation is supported, as is C code generation.
Customers in aerospace and communications have found these tools helped them achieve their design's behavioral requirements while meeting their constraints on timing budgets and hardware resource budgets. Using fixed-point data types was key to the smaller consumption of hardware resources and timing budgets.
Bigger systems of equations can be solved within hardware/timing constrains by using fixed-point data types, but there will still be limitations. Try to keep the size of the equations (matrices) modest and do a sanity check, such as generating HDL, early in the design flow to see if the hardware requirements are a fit for your intended device and hardware budget.
Regards,
Andy
Weitere Antworten (0)
Siehe auch
Kategorien
Mehr zu Fixed-Point Designer finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!