How to rotate a T-Junction using MATLAB code?

Hi,

I am trying to create a simscape model using MATLAB script, I have the T-Junction placed in the model using 'add_block' and now trying to rotate the block. I know of the command 'set(gcb,'orientation','left')' to flip the block and 'set(gcb,'orientation','up')' to rotate the T-junction so that A-B runs vertical, this places the C port on the right.

My question is how to rotate the T-Junction so that the C port is on the left?

thanks,

Aiden

Answer 1

[VM Sreeram]

Hello @Aiden

If you want the C port of the T-Junction on the left, you can rotate the block clockwise by clicking on the block and doing Ctrl+R. Alternatively, right-click the block, click on Format > Rotate Clockwise.

[Aiden]

Hi VM Sreeram, thanks for the reply

I am trying to do this using matlab script.

Answer 2

[Pramil]

To rotate the T-junction block in Simulink/Simscape so that the C port is on the left, you can use the command 'set(gcb,'orientation','down')' after adding the block using 'add_block'. This will rotate the block by 180 degrees, putting the C port on the left.

[Aiden]

Hi Pramil, thanks for getting back to me.

when I use set(gcb,'orientation','down')' it still has the C on the right?

set(gcb,'orientation','down')'- has the A at the top

set(gcb,'orientation','up')'- has the B at the top

both have the C on the right.