How can I get rid of this error? Please help me guys
9 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
E = 10e7; poisson = 0.30;
C=E/(1-poisson^2)*[1 poisson 0;poisson 1 0;0 0 (1-poisson)/2];
P = 1e6;
Lx=5; Ly=1;
numberElementsX=20;
numberElementsY=10;
numberElements=numberElementsX*numberElementsY;
[nodeCoordinates, elementNodes] =rectangularMesh(Lx,Ly,numberElementsX,numberElementsY);
xx=nodeCoordinates(:,1);
yy=nodeCoordinates(:,2);
drawingMesh(nodeCoordinates,elementNodes,'Q4','k-');
numberNodes=size(xx,1);
GDof=2*numberNodes;
stiffness=formStiffness2D(GDof,numberElements,elementNodes,numberNodes,nodeCoordinates,C,1,1); % boundary conditions
fixedNodeX=find(nodeCoordinates(:,1)==0);
fixedNodeY=find(nodeCoordinates(:,1)==0); % fixed in YY
prescribedDof=[fixedNodeX; fixedNodeY+numberNodes];
force=zeros(GDof,1);
rightBord=find(nodeCoordinates(:,1)==Lx);
force(rightBord+numberNodes)=P*Ly/numberElementsY;
force(rightBord(1)+numberNodes)=P*Ly/numberElementsY/2;
force(rightBord(end)+numberNodes)=P*Ly/numberElementsY/2;
displacements=solution(GDof,prescribedDof,stiffness,force);
% displacements and deformed shape
disp('Displacements')
jj=1:GDof; format f=[jj; displacements'];
fprintf('node U\n') fprintf('%3d %12.8f\n',f)
UX=displacements(1:numberNodes); UY=displacements(numberNodes+1:GDof);
scaleFactor=0.1; figure
drawingField(nodeCoordinates+scaleFactor*[UX UY],elementNodes,'Q4',UX);%U XX hold on
drawingMesh(nodeCoordinates+scaleFactor*[UX UY],elementNodes,'Q4','k-');
drawingMesh(nodeCoordinates,elementNodes,'Q4','k--');
colorbar
title('U XX (on deformed shape)')
axis off
% stresses at nodes stresses2D(GDof,numberElements,elementNodes,numberNodes,nodeCoordinates,displacements,UX,UY,C,scaleFactor);
''Undefined function or variable "nodeCoordinates".''
[nodeCoordinates, elementNodes] =rectangularMesh(Lx,Ly,numberElementsX,numberElementsY);
6 Kommentare
Walter Roberson
am 24 Feb. 2023
It has a switch on the requested element type, and calls plot3() or patch() as appropriate.
Antworten (2)
John D'Errico
am 10 Apr. 2015
READ THE ERROR MESSAGE.
So where in this script have you defined the variable nodeCoordinatea?
It was generated by rectangularMesh, a code that is NOT supplied by MathWorks. Try this:
which rectangularMesh -all
Do you have that function? If not, then you will need to download it, as well as its companions from this site:
4 Kommentare
loukmane el khaldi
am 14 Mai 2019
I downloaded the files and I tried to execute this file: rectangular Mesh.p but this message appears "Warning: The P-code file MATLABsoftware_rectangularMesh.p was generated prior to MATLAB version 7.5 (R2007b) and will Use MATLABsoftware_rectangularMesh.p using MATLAB R2007b or later. " How do I correct this error? Help me please.
Walter Roberson
am 14 Mai 2019
You can hope that nothing bad happens, but if it fails then you would have to go back go Springer to ask them to update the file, which they would pass along to the author of the book. However I would tend to doubt there would be any actual result.
Alternately if you do not have a Student license (not sure about a Home license) then you can probably use your existing license to access MATLAB R2007a and run the code with that.
waqas
am 26 Aug. 2019
You can use following rectangularMesh function to generate the same parameters. I hope this works for your code.
function [nodeCoordinates,elementNodes] = rectangularMesh(Lx,Ly,...
numberElementsX,numberElementsY)
xx = 0:Lx/numberElementsX:Lx;
yy = 0:Ly/numberElementsY:Ly;
[XX YY] = meshgrid(yy,xx);
nodeCoordinates = [YY(:),XX(:)];
elementNodes = zeros(numberElementsX*numberElementsY,4);
j = 1;
i =1;
i1 =0;
counter = 0;
for j = 1:numberElementsY
for i =1: numberElementsX
counter = counter +1;
if i ==1 && j==1
i1 =1;
else
i1 = i1 +1;
end
i2 = i1 + 1;
i4 = i1 + numberElementsX + 1;
i3 = i2 + numberElementsX + 1;
elementNodes(counter,:) = [i1 i2 i3 i4];
end
i1 = i1+1;i2 = i2+1;
end
end
8 Kommentare
Aravinthan Chakarapani
am 8 Nov. 2021
Hi there Waqas!
How did you get the codes for rectangularmesh? If you wrote it yourself, do you also happen to have codes suitable for drawingmesh?
waqas
am 10 Nov. 2021
Hi Arvinthan,
Yes I wrote the code myself for the rectangular mesh. I dont remember writing a drawingmesh.
Siehe auch
Kategorien
Mehr zu Startup and Shutdown finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!